D-Link DCS-932L User Manual download pdf (Page 24)

24D-Link DCS-932L User Manual

Section 4 - Web Conguration

Network Setup

Select this connection if you have a DHCP server running on your

network and would like a dynamic IP address to be updated to your

camera automatically.

You may obtain a static or xed IP address and other network

information from your network administrator for your camera. A static

IP address will ease you for accessing your camera in the future.

IP Address: The xed IP address

Subnet Mask: The default value is “255.255.255.0.” Used to determine

if the destination is the same subnet.

Default Gateway: The gateway used to forward frames to destinations

in a dierent subnet. Invalid gateway settings may cause the failure of

transmissions to a dierent subnet.

Primary DNS: Primary domain name server that translates names to

IP addresses.

Secondary DNS: Secondary domain name server to backup the

Primary DNS.

DHCP:

Static IP Client:

PPPoE Settings:

Port Settings:

UPnP Settings:

his section allows you to congure your network settings.

If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. You can get this information

from your Internet service provider (ISP).

You may congure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be set to a

number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to

1010, users must type http://192.168.0.100:1010 instead of only “http://192.168.0.100”.

Enable this setting to congure your camera as an UPnP device in the network.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

No comments

D-Link DCS-932L User Manual Page 24