D-link DCS-6620G User Manual download pdf (Page 90)

DCS-6620G User’s Manual

D-Link Systems, Inc.

Using IP surveillance Software

This section depicts, in detail, how to manipulate the monitor tool.

Using the Monitor Program

Connection of the DCS-6620G

Channel:

Once you have the privilege to connect to the DCS-6620G, the cameras will automatically

appear in the video area in the order they are connected. Once you have set up the camera

in the video channel, the color of the channel number will turn blue, indicating that the camera

has been added to IP surveillance. If you do not set up the camera for the video channel, the

color of the channel number will be gray.

There is a unique light signal associated with each channel number. It indicates the status of

the dedicated video channel, which is depicted as follows:

Off

The video channel is not connected with any DCS-6620G yet.



Green

The green light means the DCS-6620G associated with this channel number is

connected, and the video is monitored in the video area.

Red

The red light indicates the video from this channel is recording into the video

database. In this mode, you don’t have to drag and drop the channel to the video

area. This means that this application software supports real-time recording

with and without real-time monitoring for the dedicated video channel.

Blink

With the motion detection mechanism set in the DCS-6620G, the light of the

corresponding channel will blink once the motion event is triggered.



Monitor Program (continued)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 144 145

No comments

D-link DCS-6620G User Manual Page 90