D-Link DVG-N5412SP User Manual download pdf (Page 108)

DVG-N5412SP User’s Manual VoIP Router Configuration-IVR

D-Link Systems, Inc. 108

4-2 IP Configuration Settings—Set the IP Configuration of the

WAN Port

Static IP Settings

Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet

Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if you have

any question.

Function Command

Select a Static IP

 After entering IVR mode, dial 114.

 When voice prompt plays “Enter value”, dial 1 (to select static IP)

IP address Settings

 After entering IVR mode, dial 111. When voice prompt plays “Enter value”,

enter your IP address followed by “#”.

Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.

Subnet Mask Settings

 After entering IVR mode, dial 112. When voice prompt plays “Enter value”,

enter your subnet mask followed by “#”.

Example: If the subnet mask value is 255.255.255.0, dial 255*255*255*0#.

Default Gateway Settings

 After entering IVR mode, dial 113. When voice prompt plays “Enter value”,

enter your default gateway’s IP address followed by “#”.

Example: If the default gateway is 192.168.1.254, dial 192*168*1*254#.

Save Settings and Restart

 To save settings, dial 509 (Save Settings). The system will save the current

settings. Please restart the system. Wait for about 40 seconds for the

system to restart, and then enter 101 to check whether the IP address was

retained. If the system does not play back the IP address after dialing 101,

this indicates that the VoIP Router currently is not connected to the

Internet. Please check and make sure the cable connections, account

numbers, and passwords are correct.

Dynamic IP (DHCP) Settings

After entering IVR mode, dial 114.

When voice prompt plays “Enter value”, dial 2 (to select DHCP).

Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted, press

101 to check whether or not the IP address was retained.

Note: If the system does not play back the IP address, this indicates that the VoIP Router failed to

communicate with a DHCP server. Please check with your DHCP server or ISP.

ADSL PPPoE Settings

Note: Complete PPPoE settings should include: Select PPPoE (option 3 of 114), PPPoE account (121) and

PPPoE password (122).

Please contact your local Internet Service Provider (ISP) if you have any questions.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 116 117

No comments

D-Link DVG-N5412SP User Manual Page 108