D-Link KX-TDA100 User Manual Page 201
- Page / 250
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
2.11 Connection of Peripherals
Installation Manual 201
2.11 Connection of Peripherals
2.11.1 Connection of Peripherals
BGM/MOH
The Hybrid IP-PBX provides Background Music and Music on Hold. Up to 2 external music sources (e.g.,
user-supplied radios) can be connected to the Hybrid IP-PBX.
CAUTION
• Wiring should be done carefully to prevent undue force being exerted on the plug. Otherwise,
music may intermittent.
• External Music Jacks are SELV ports and should only be connected to approved SELV devices, or
in Australia, via the Line Isolation Unit with the Telecommunications Compliance Label.
Note
When the Hybrid IP-PBX and external music sources are not connected to the same earth, hum noise
may be induced into Background Music and Music on Hold.
BGM/
Music on Hold
Pager:
Amplifier/Speaker
PC
Printer
PC
Cable Maximum Distance
ø 0.4 mm: Under 10 m
ø 0.5 mm: Under 10 m
ø 0.6 mm: Under 10 m
CAT 5: Under 10 m
Cable Maximum Distance
ø 0.4 mm: Under 10 m
ø 0.5 mm: Under 10 m
ø 0.6 mm: Under 10 m
CAT 5: Under 10 m
Maximum Distance
Under 5 m
Maximum Distance
Under 2 m
USB
RS-232C
Server PC
- KX-TDA100 1
- KX-TDA200 1
- Installation Manual 1
- System Components 2
- Installation Manual 3 3
- 4 Installation Manual 4
- T7565) series telephones 4
- Important Safety Instructions 5
- SAVE THESE INSTRUCTIONS 6
- Precaution 7
- MODEL No.: 8
- SERIAL No.: 8
- Installation Manual 9 9
- Introduction 10
- Installation Manual 11 11
- 12 Installation Manual 12
- Table of Contents 13
- 14 Installation Manual 14
- Installation Manual 15 15
- 16 Installation Manual 16
- Section 1 17
- System Outline 17
- 1.1 System Highlights 18
- PC Phone/PC Console Features 19
- Hospitality Features 19
- 1.2 Basic System Construction 20
- Hybrid IP-PBX 21
- Mountable Equipment 22
- 1.3 Options 24
- 1.4 Specifications 27
- 1.4.2 Characteristics 29
- 1.4.3 System Capacity 30
- Maximum Terminal Equipment 33
- MEC Card Calculation 33
- Power Supply Unit Selection 34
- PSU Capability 35
- Section 2 37
- Installation 37
- 2.1 Before Installation 38
- 2.2.1 Unpacking 40
- 2.2.2 Names and Locations 41
- Opening the Front Cover 42
- Closing the Front Cover 43
- Function 44
- Guide Rail 45
- Release Lever 46
- Back Board 46
- 4. Replace the PSU 47
- 2.2.5 Frame Earth Connection 48
- Installation Manual 49 49
- Covering the Blank Slots 52
- Handling of the Cables 53
- 2.2.8 Types of Connectors 55
- 56 Installation Manual 56
- When connecting a BRI card 57
- 58 Installation Manual 58
- Installation Manual 59 59
- 60 Installation Manual 60
- Anchor Plug 61
- Screw (B) 62
- Screw (A) Metal Bracket 65
- Screws (B) 66
- Metal Bracket 66
- Installation Manual 67 67
- Overview 68
- Outside Installation 69
- Installation of an Earth Rod 69
- 70 Installation Manual 70
- 2.3.1 MPR Card 71
- 2.3.2 MEC Card 73
- 2.3.3 RMT Card 74
- 2.4.2 DID8 Card 77
- 2.4.3 CID/PAY8 Card 79
- 2.4.4 CID8 Card 80
- 2.4.5 E&M8 Card 81
- 2.4.6 T1 Card 84
- 2.4.7 E1 Card 87
- Switch Settings 88
- 2.4.8 BRI4 and BRI8 Cards 90
- LINE LED Pattern 92
- Installation Manual 93 93
- 2.4.9 PRI30 Card 94
- 2.4.10 PRI23 Card 98
- Diameter Maximum Distance 100
- 0.5 mm: Under 200 m 100
- 2.4.11 IP-GW4 Card 101
- LED Indications 102
- 2.4.12 IP-GW4E Card 103
- 2.4.13 IP-GW16 Card 105
- 2.5.1 CSIF4 and CSIF8 Card 107
- Pin Assignments 108
- 2.5.2 DHLC8 Card 109
- 2.5.3 DLC8 Card 112
- 2.5.4 DLC16 Card 114
- 2.5.5 SLC8 Card 116
- 2.5.6 EXT-CID Card 118
- 2.5.7 SLC16 and MSLC16 Cards 119
- 2.5.8 IP-EXT16 Card 121
- 2.6.1 OPB3 Card 123
- 2.6.2 DPH4 Card 124
- 2.6.3 DPH2 Card 126
- Doorphone 2 128
- Doorphone 1 128
- 2.6.4 EIO4 Card 129
- Installation Manual 131 131
- 2.6.5 ECHO16 Card 132
- 2.6.6 MSG4 Card 133
- 2.6.7 CTI-LINK Card 134
- 2.7 Connection of Extensions 136
- With APT 137
- With DPT 137
- Using an EXtra Device Port 138
- Using a Modular T-Adaptor 139
- With KX-T7600E Series DPT 141
- Connecting to a Master DPT 143
- 2.8.1 Overview 145
- 146 Installation Manual 146
- 2.8.2 Procedure Overview 147
- 4. Finish the site survey 148
- 6. Mount the CS on the wall 148
- 2.8.3 Site Planning 149
- 150 Installation Manual 150
- CS Coverage Area 151
- Site Survey Preparation 151
- 152 Installation Manual 152
- 2.8.4 Before Site Survey 153
- CS No. CS ID No 154
- Channel Number Switch 155
- Radio Signal 155
- Test Switch 155
- Channel 0 155
- 156 Installation Manual 156
- Channel No 157
- 158 Installation Manual 158
- 5 m to 10 m 159
- Channel no. 0 Channel no. 1 159
- Channel no. 2 Channel no. 3 159
- Clearing the Stored Scan Data 160
- 2.8.6 After Site Survey 161
- Using a CSIF Card 162
- Using a DHLC/DLC Card 163
- Connecting the CS 164
- To CSIF card 165
- Registering the PS 166
- Installation Manual 167 167
- PIN for PS Registration 168
- PS Termination 169
- Testing the Operation 170
- 2.8.8 Wall Mounting 171
- Reference for Wall Mounting 172
- 2.9.1 Overview 173
- 174 Installation Manual 174
- 2.9.2 Procedure Overview 175
- 2.9.3 Site Planning 177
- 178 Installation Manual 178
- 180 Installation Manual 180
- 2.9.4 Before Site Survey 181
- 182 Installation Manual 182
- 2.9.5 Site Survey 183
- 184 Installation Manual 184
- Scan Data No 185
- Deleting the Stored Scan Data 186
- 2.9.6 After Site Survey 187
- Extn. No 192
- System Lock Password 193
- 2.9.8 Wall Mounting 196
- Sensors, and External Relays 198
- Connection 199
- To doorphones/ 200
- Installation Manual 201 201
- PC/Printer (via RS-232C) 202
- Installation Manual 203 203
- Trunk Card 205
- (e.g., LCOT8) 205
- Extension Card 205
- (e.g., SLC8) 205
- 206 Installation Manual 206
- Using BRI Card 207
- 208 Installation Manual 208
- Installation Manual 209 209
- Installation Manual 211 211
- 212 Installation Manual 212
- Section 3 213
- 3.1 Overview 214
- 3.2 Connection 215
- External Modem Connection 216
- Password Security 217
- Items (Quick Setup) 218
- Installation Manual 219 219
- 220 Installation Manual 220
- Section 4 221
- Troubleshooting 221
- 4.1 Troubleshooting 222
- 4.1.2 Connection 224
- 4.1.3 Operation 226
- 4.1.4 Using the Reset Button 228
- Error Log Display Format 229
- List of Errors and Solutions 231
- Section 5 241
- Appendix 241
- 5.1 Revision History 242
- 5.1.2 Version 2.0 243
- Installation Manual 245 245
- 246 Installation Manual 246
- Installation Manual 247 247
- 248 Installation Manual 248
- Installation Manual 249 249
- Copyright: 250
- KK0103AH6094 250
Related products and manuals for Gateways/controllers D-Link KX-TDA100
(4 pages)© 2020, manymanuals.com. All rights reserved. | 3.544 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals