D-Link KVM-440 User Manual download pdf (Page 11)

C. Connect only USB and VGA connectors to computers. (Figure 9).

Figure 9: USB and VGA video connected

4.4. Cascade Chaining

The KVM switch supports cascades of up to 3 levels. Control up to

64/256/4096 PCs from a single console. Cascaded units do not require any

special configuration. A cascade configuration expands the system’s

capabilities and allows you to select computers connected to the Master or

Slave. Once connected, the KVM Switches will automatically configure

themselves appropriately as the Master or Slave.

To install a cascade chain, please follow the instruction below.

A. Power off any attached computers/devices before installing the KVM

Switch.

B. Use the custom combo cable set (See Figure 6) to connect one or more

Slave KVM Switches to any PC port of Master KVM Switch. The KVM to

KVM must be connected through a PS/2 connection. (Please refer to

Figure 7 & Figure 8).

C. Plug in the power adapter of the first level Master KVM Switch and

connect Master KVM switch to computers.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

No comments

D-Link KVM-440 User Manual Page 11