D-Link DES-1008PA User's Guide download pdf (Page 9)

UNPACKING AND INSTALLATION

This chapter provides unpacking and installation information for the

Switch.

Unpacking

Open the shipping cartons of the Switch and carefully unpack its

contents. The carton should contain the following items:

One DES-1008PA

One AC power adapter

Four rubber feet to be used for shock cushioning

User’s Guide

If any item is found missing or damaged, please contact your local

reseller for replacement.

Installation

The setup of the Switch can be performed using the following steps:

The surface must support at least 1.5 Kg (3.5 lbs) for the Switch.

The power outlet should be within 1.82 meters (6 feet) of the

Switch.

Visually inspect the DC power jack and make sure that it is fully

secured to the power adapter.

Make sure that there is proper heat dissipation from and

adequate ventilation around the Switch. Do not place heavy

objects on the Switch.

Note: Be sure to connect 48V/1.25A power adapter DC plug to DC

jack of DES-1008PA before plugging the power cord to AC power

outlet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

D-Link DES-1008PA User's Guide Page 9