D-Link DGS-1210-24P User Manual

Product Introduction D-Link Web Smart Switch User Manual 44 1 Product Introduction Thank you and congratulations on your purchase of D-Link Web Smar

Command Line Interface D-Link Web Smart Switch User Manual 9944 DGS-1210-24:admin#upload firmware_toTFTP 10.90.90.10 RUNTIME Connecting to server.

Command Line Interface D-Link Web Smart Switch User Manual 9955 DGS-1210-24:admin#logout ********** * Logout * ********** NOTE: Save your conf

Command Line Interface D-Link Web Smart Switch User Manual 9966 Restrictions None. Example usage: To reboot the Switch: DGS-1210-24:admin#reboot A

Command Line Interface D-Link Web Smart Switch User Manual 9977 DGS-1210-24:admin#show ipif IP Setting Mode : Static IP Address

Command Line Interface D-Link Web Smart Switch User Manual 9988 DGS-1210-24:admin#config account admin password 1234 DGS-1210-24:admin# save Purp

Command Line Interface D-Link Web Smart Switch User Manual 9999 DGS-1210-24:admin#debug info % segmentation fault log file : File doesn't exi

Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual 110000 Appendix A - Ethernet Technology This chapter will describe the features

Appendix B - Technical Specifications D-Link Web Smart Switch User Manual 110011 Appendix B - Technical Specifications Hardware Specifications Key C

Appendix B - Technical Specifications D-Link Web Smart Switch User Manual 110022 - DSCP - ToS - TCP/UDP port number Up to 8 queues per port S

Product Introduction D-Link Web Smart Switch User Manual 55 DGS-1210-16 16-Port 10/100/1000Mbps plus 4 SFP Slot Web Smart Switch. Front Panel Figu

Product Introduction D-Link Web Smart Switch User Manual 66 Port Link/Act/Speed LED (1-28): The Link/Act/Speed LED flashes, which indicates a networ

Product Introduction D-Link Web Smart Switch User Manual 77 SWITCH GNDPower Cord Cli pACLINE100-240 VAC50-60 Hz2AMAXRear Panel Figure 1.6 – DGS-12

Hardware Installation D-Link Web Smart Switch User Manual 88 2 Hardware Installation This chapter provides unpacking and installation information fo

Hardware Installation D-Link Web Smart Switch User Manual 99 Then, use the screws provided with the equipment rack to mount the switch in the rack.

Hardware Installation D-Link Web Smart Switch User Manual 1100 Figure 2.4 – Insert Tie Wrap to the Switch B) Plug the AC power cord into the power

Hardware Installation D-Link Web Smart Switch User Manual 1111 D) Circle the tie of the Retainer around the power cord and into the locker of the R

Hardware Installation D-Link Web Smart Switch User Manual 1122 Figure 2.9 – Plugging the switch into an outlet As a precaution, the switch should

Getting Started D-Link Web Smart Switch User Manual 1133 3 Getting Started This chapter introduces the management interface of D-Link Web-Smart Swit

Information in this document is subjected to change without notice. Copyright and Trademarks © 2013 D-Link Corporation. All rights reserved. Reprodu

Getting Started D-Link Web Smart Switch User Manual 1144 In order to login and configure the switch via an Ethernet connection, the PC must have an

Configuration D-Link Web Smart Switch User Manual 1155 4 Configuration The features and functions of the D-Link Web Smart Switch can be configured f

Configuration D-Link Web Smart Switch User Manual 1166 Type the desired new password in the Password field and again in the Confirm Password field,

Configuration D-Link Web Smart Switch User Manual 1177 The SNMP Setting allows you to quickly enable or disable the SNMP function. The default SNMP

Configuration D-Link Web Smart Switch User Manual 1188 Web-based Management After clicking the Exit button in Smart Wizard, you will see the screen

Configuration D-Link Web Smart Switch User Manual 1199 Tool Bar > Save Menu The Save Menu provides Save Configuration and Save Log functions. Fi

Configuration D-Link Web Smart Switch User Manual 2200 Provide a safe way to reboot the system. Click Apply to restart the Switch. Reboot Device

Configuration D-Link Web Smart Switch User Manual 2211 Figure 4.14 – Tools Menu > Firmware Backup and Upgrade HTTP: Backup or upgrade the firmw

Configuration D-Link Web Smart Switch User Manual 2222 TFTP: Install the language pack from a remote TFTP server. Specify TFTP Server IP Address wit

Configuration D-Link Web Smart Switch User Manual 2233 Function Tree All configuration options on the Switch are accessed through the Function Tree.

Table of Contents D-Link Web Smart Switch User Manual i Table of Contents Table of Contents ...

Configuration D-Link Web Smart Switch User Manual 2244 Figure 4.18 – Device Information It also offers an overall status of common software featur

Configuration D-Link Web Smart Switch User Manual 2255 IP Information: There are three ways for the Switch to obtain an IP address: Static, DHCP (Dy

Configuration D-Link Web Smart Switch User Manual 2266 Speed: Gigabit Fiber connections can operate in 1000M Full, Auto or Disabled. Copper connect

Configuration D-Link Web Smart Switch User Manual 2277 Server IP Address: Specifies the IPv4 address of the system log server. UDP Port: Specifies

Configuration D-Link Web Smart Switch User Manual 2288 Figure 4.25 – System > Power Saving Advanced Power Saving Settings: Type: Specifies the

Configuration D-Link Web Smart Switch User Manual 2299 Figure 4.26 – System > IEEE802.3az EEE Settings From Port / To Port: A consecutive group

Configuration D-Link Web Smart Switch User Manual 3300 A VLAN is a group of ports that can be anywhere in the network, but communicate as though th

Configuration D-Link Web Smart Switch User Manual 3311 Figure 4.30 – Configuration > 802.1Q VLAN PVID The 802.1Q Management VLAN setting allows

Configuration D-Link Web Smart Switch User Manual 3322 Voice VLAN OUI Settings: This allows the user to configure the user-defined voice traffic’s

Configuration D-Link Web Smart Switch User Manual 3333 Figure 4.33 – VLAN > Voice VLAN > Voice VLAN Port Settings From Port / To Port: A con

Table of Contents D-Link Web Smart Switch User Manual ii Tool Bar > Smart Wizard ...

Configuration D-Link Web Smart Switch User Manual 3344 Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically p

Configuration D-Link Web Smart Switch User Manual 3355 Click Add to create a new surveillance component and Refresh to refresh the Auto Surveilla

Configuration D-Link Web Smart Switch User Manual 3366 Figure 4.38 – L2 Functions > Loopback Detection Loopback Detection: Click to enable or d

Configuration D-Link Web Smart Switch User Manual 3377 Figure 4.39 – L2 Functions > MAC Address Table > Static Mac Address To initiate the r

Configuration D-Link Web Smart Switch User Manual 3388 Figure 4.40 – L2 Functions > MAC Address Table > Dynamic Forwarding Table The Switch

Configuration D-Link Web Smart Switch User Manual 3399 Figure 4.41 – L2 Functions > Spanning Tree > STP Global Settings STP Version: You can

Configuration D-Link Web Smart Switch User Manual 4400 Figure 4.42 – L2 Functions > Spanning Tree > STP Port Settings From Port/To Port: A c

Configuration D-Link Web Smart Switch User Manual 4411 Restricted Role: Toggle between True and False to set the restricted role state of the packet

Configuration D-Link Web Smart Switch User Manual 4422 Figure 4.44 – L2 Functions > Link Aggregation > LACP Port Settings From Port / To Por

Configuration D-Link Web Smart Switch User Manual 4433 Figure 4.45 – L2 Functions > Multicast > IGMP Snooping By default, IGMP is Disabled.

Table of Contents D-Link Web Smart Switch User Manual iii Security > Port Security ...

Configuration D-Link Web Smart Switch User Manual 4444 Figure 4.46 – L2 Functions > Multicast > IGMP Snooping VLAN Settings State: Specify t

Configuration D-Link Web Smart Switch User Manual 4455 Figure 4.48 – L2 Functions > Multicast > MLD Snooping By default, MLD is Disabled. If

Configuration D-Link Web Smart Switch User Manual 4466 Figure 4.49 – L2 Functions > Multicast > MLD Snooping VLAN Settings State: Specify th

Configuration D-Link Web Smart Switch User Manual 4477 Multicast MAC Address: The MAC address of the static source of multicast packets. This mus

Configuration D-Link Web Smart Switch User Manual 4488 Current Time: Displays the current date and time for the switch. If choosing SNTP for the cl

Configuration D-Link Web Smart Switch User Manual 4499 LLDP (Link Layer Discovery Protocol) provides IEEE 802.1AB standards-based method for switch

Configuration D-Link Web Smart Switch User Manual 5500 Figure 4.56 – L2 Functions > LLDP > LLDP Port Settings From Port/ To Port: A consecut

Configuration D-Link Web Smart Switch User Manual 5511 Figure 4.57 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings From Port / To

Configuration D-Link Web Smart Switch User Manual 5522 Figure 4.58 – L2 Functions > LLDP > 802.3 Extension TLV Port Settings From Port / To

Configuration D-Link Web Smart Switch User Manual 5533 Figure 4.59 – L2 Functions > LLDP > LLDP Management Address Settings From Port / To P

Table of Contents D-Link Web Smart Switch User Manual iv Fast Ethernet Technology ...

Configuration D-Link Web Smart Switch User Manual 5544 The LLDP Local Port Table window displays LLDP local port information. L2 Functions > LLDP

Configuration D-Link Web Smart Switch User Manual 5555 Figure 4.63 – L2 Functions > LLDP > LLDP Local Port Detailed Table This LLDP Remote P

Configuration D-Link Web Smart Switch User Manual 5566 Figure 4.64 – L2 Functions > LLDP > LLDP Remote Port Brief Table To view the more inf

Configuration D-Link Web Smart Switch User Manual 5577 Figure 4.65 – L2 Functions > LLDP > LLDP Remote Port Normal Table To view the detaile

Configuration D-Link Web Smart Switch User Manual 5588 Figure 4.66 – L2 Functions > LLDP > LLDP Remote Port Detailed Table The LLDP Statisti

Configuration D-Link Web Smart Switch User Manual 5599 Figure 4.67 – L2 Functions > LLDP > LLDP Statistics The following information can be

Configuration D-Link Web Smart Switch User Manual 6600 This window contains two main parts, DHCP Relay Global Settings and DHCP Relay Interface Sett

Configuration D-Link Web Smart Switch User Manual 6611 Figure 4.69 – QoS > Bandwidth Control From Port / To Port: A consecutive group of ports

Configuration D-Link Web Smart Switch User Manual 6622 Figure 4.70 – QoS > 802.1p/DSCP/ToS Select QoS Mode: Specifies the QoS mode to be 802.1p

Configuration D-Link Web Smart Switch User Manual 6633 The TCP/UDP Port Priority Settings window allows user to configure the port priority. QoS >

錯誤! 找不到參照來源。 D-Link Web Smart Switch User Manual 1 Intended Readers This guide provides instructions to install the D-Link Gigabit Web Smart Switch

Configuration D-Link Web Smart Switch User Manual 6644 Figure 4.73 – Security > Port Security From Port / To Port: A consecutive group of ports

Configuration D-Link Web Smart Switch User Manual 6655 DoS Type Selection: Land Attack - Specifies that the DoS attack prevention type will be set t

Configuration D-Link Web Smart Switch User Manual 6666 Forwarding Port Settings: Click to enable or disable the function. Click Apply to implement

Configuration D-Link Web Smart Switch User Manual 6677 The ARP Spoofing Prevention function can discard the ARP Spoofing Attack in the network by ch

Configuration D-Link Web Smart Switch User Manual 6688 Secure Sockets Layer (SSL) is a security feature that provides a secure communication path be

Configuration D-Link Web Smart Switch User Manual 6699 Figure 4.81 – AAA > 802.1X > 802.1X Settings 802.1X: By default, 802.1X is disabled.

Configuration D-Link Web Smart Switch User Manual 7700 Auto - If Auto is selected, it will enable 802.1X and cause the port to begin in the unauthor

Configuration D-Link Web Smart Switch User Manual 7711 Click Apply to implement the changes made. Access Control List (ACL) allows you to establish

Configuration D-Link Web Smart Switch User Manual 7722 NOTE: Once the ACL rules conflict, rules with the smaller rule ID will take higher priority.

Configuration D-Link Web Smart Switch User Manual 7733 Figure 4.86 – Add Access Profile The steps of adding an access profile are described below:

Product Introduction D-Link Web Smart Switch User Manual 22 o An object has fallen into the product. o The product has been exposed to water. o T

Configuration D-Link Web Smart Switch User Manual 7744 TCP: Specifies TCP as the Layer 3 protocol that the access profile checks. UDP: Specifies UDP

Configuration D-Link Web Smart Switch User Manual 7755 Figure 4.89 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL ICMP) The Add ACL

Configuration D-Link Web Smart Switch User Manual 7766 To define the IPv4 ACL IGMP profile, Select IPv4 ACL with IGMP and click Select button. The

Configuration D-Link Web Smart Switch User Manual 7777 To define the IPv4 ACL TCP profile, Select IPv4 ACL with TCP and click Select button. T

Configuration D-Link Web Smart Switch User Manual 7788 To define the IPv4 ACL UDP profile, Select IPv4 ACL with UDP and click Select button. T

Configuration D-Link Web Smart Switch User Manual 7799 To define the IPv4 ACL Protocol ID profile, Select IPv4 ACL with Protocol ID and click Select

Configuration D-Link Web Smart Switch User Manual 8800 Figure 4.93 – Confirmation of Creating Access Profile List NOTE: You cannot select Payload

Configuration D-Link Web Smart Switch User Manual 8811 Rule Detail: Specifies the detail of the rule. Access ID – Specifies the Access ID (1-65535).

Configuration D-Link Web Smart Switch User Manual 8822 Figure 5.100 – ACL > ACL Finder Simple Network Management Protocol (SNMP) is an OSI Laye

Configuration D-Link Web Smart Switch User Manual 8833 Figure 4.97 – SNMP > SNMP > SNMP User Table User Name: Enter a SNMP user name of up t

Product Introduction D-Link Web Smart Switch User Manual 33 • Systems are considered to be components in a rack. Thus, "component" refers

Configuration D-Link Web Smart Switch User Manual 8844 v2c – SNMPv2c supports both centralized and distributed network management strategies. It

Configuration D-Link Web Smart Switch User Manual 8855 Community Name: Type an alphanumeric string of up to 32 characters that is used to identify m

Configuration D-Link Web Smart Switch User Manual 8866 Figure 4.104 – SNMP > RMON > RMON Ethernet Statistics Configuration The RMON Ethernet

Configuration D-Link Web Smart Switch User Manual 8877 Figure 4.106 – SNMP > RMON > RMON Alarm Settings The configuration contains the follo

Configuration D-Link Web Smart Switch User Manual 8888 Log and Trap – Indicates that the event is both a log entry and a trap. Community: When SNMP

Configuration D-Link Web Smart Switch User Manual 8899 To view the statistics of individual ports, click one of the linked port numbers for details.

Configuration D-Link Web Smart Switch User Manual 9900 • Open in Cable means the wires of RJ45 cable may be broken, or the other end of the cable i

Command Line Interface D-Link Web Smart Switch User Manual 9911 5 Command Line Interface The D-Link Web Smart Switch allows a computer or terminal t

Command Line Interface D-Link Web Smart Switch User Manual 9922 Command Parameter reboot reset config show ipif show switch config account admi

Command Line Interface D-Link Web Smart Switch User Manual 9933 Syntax download {firmware_fromTFTP | cfg_fromTFTP} <ipaddr> <path_filename