D-Link DSL-G604T User Manual download pdf (Page 28)

DGS-3024 Gigabit Ethernet Switch Manual

First Time Connecting to The Switch

The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or

changing its settings. This section tells how to log onto the Switch.

NOTE: The passwords used to access the Switch are case-sensitive;

therefore, "S" is not the same as "s."

When you first connect to the Switch, you will be presented with the first login screen (shown below).

NOTE: Press Ctrl+R to refresh the screen. This command can be used at

any time to force the console program in the Switch to refresh the console

screen.

Press Enter in both the Username and Password fields. You will be given access to the command prompt DGS-3024:4#

shown below:

There is no initial username or password. Leave the Username and Password fields blank.

Figure 5- 2. Command Prompt

NOTE: The first user automatically gets Administrator level privileges. It is

recommended to create at least one Admin-level user account for the

Switch.

Password Protection

The DGS-3024 does not have a default user name and password. One of the first tasks when settings up the Switch is to

create user accounts. If you log in using a predefined administrator-level user name, you have privileged access to the

Switch's management software.

After your initial login, define new passwords for both default user names to prevent unauthorized access to the Switch, and

record the passwords for future reference.

To create an administrator-level account for the Switch, do the following:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 206 207

No comments

D-Link DSL-G604T User Manual Page 28