D-Link DWA-110 Specifications download pdf (Page 39)

39D-Link DWA-110 User Manual

Section 5 - Troubleshooting

Make sure that the DWA-110 Wireless Adapter is properly seated in the computer’s USB slot.

If Windows

does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously

loaded.

2. The computer does not recognize the DWA-110 Wireless Adapter.

• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem

with the broadband connection.

• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and

Ethernet cables are ﬁrmly connected.

• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the network

• In Infrastructure mode, make sure the same Service Set Identiﬁer (SSID) is speciﬁed on the settings for the wireless

clients and access points. The SSID factory default setting for D-Link products is default. (Double-click on the WLAN

icon in the taskbar. The Link Info screen will display the SSID setting.)

• In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it might be necessary to

set up one client to establish a BSS (Basic Service Set) and wait brieﬂy before setting up other clients. This prevents

several clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being

established, rather than a single BSS with multiple clients associated to it.

Check that the Network Connection for the wireless client is conﬁgured properly. Select AP (Infrastructure) when connecting to an

access point and select Ad-Hoc mode when connecting without an access point. Double-click on the WLAN icon in the taskbar >

3. The computer with the DWA-110 installed is unable to connect to the wireless network and/or the Internet.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

No comments

D-Link DWA-110 Specifications Page 39