D-Link AirPlus XTREME G DWL-G520 Specifications download pdf (Page 55)

Troubleshooting

This Chapter provides solutions to problems that can occur during the installation and

operation of the DI-624 Wireless Broadband Router. We cover various aspects of the

network setup, including the network adapters. Please read the following if you are having

problems.

Note: If you have

changed the default IP

Address, make sure to

ping the correct IP

Address assigned to the

DI-624.

Note: It is recommended that you use an Ethernet connection to

configure the DI-624 Wireless Broadband Router.

1.The computer used to configure the DI-624 cannot access the

Configuration menu.

Check that the Ethernet LED on the DI-624 is ON. If the LED is not

ON, check that the cable for the Ethernet connection is securely

inserted.

Check that the Ethernet Adapter is working properly. Please see

item 3 (Check that the drivers for the network adapters are

installed properly) in this Troubleshooting section to check that

the drivers are loaded properly.

Check that the IP Address is in the same range and subnet as the

DI-624. Please see Checking the IP Address in Windows XP in

the Networking Basics section of this manual.

Note: The IP Address of the DI-624 is 192.168.0.1. All the computers on the

network must have a unique IP Address in the same range, e.g., 192.168.0.x.

Any computers that have identical IP Addresses will not be visible on the

network. They must all have the same subnet mask, e.g., 255.255.255.0

Do a Ping test to make sure that the DI-624 is responding. Go to

Start>Run>Type Command>Type ping 192.168.0.1. A successful

ping will show four replies.



1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 96 97

No comments

D-Link AirPlus XTREME G DWL-G520 Specifications Page 55