D-Link DSL-2750E User Manual download pdf (Page 9)

DSL-2750E User Manual

2 Hardware Installation

2.1 DSL Uplink Connection

Step 1 Connect the DSL port of the device and the Modem port of the splitter

with a telephone cable. Connect the phone to the Phone port of the

splitter through a telephone cable. Connect the incoming line to the

Line port of the splitter.

The splitter has three ports:

 Line: Connect to a wall phone port (RJ-11 jack).

 Modem: Connect to the DSL port of the device.

 Phone: Connect to a telephone set.

Step 2 Connect a LAN port of the device to the network card of the PC

through an Ethernet cable (MDI/MDIX).

Note:

Use twisted-pair cables to connect the device to a Hub or switch.

Step 3 Plug one end of the power adapter to the wall outlet and the other end

to the Power port of the device.

Figure 3 displays the application diagram for the connection of the device, PC,

splitter and telephone sets, when no telephone set is placed before the splitter.

Figure 3 Connection diagram

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 102 103

No comments

D-Link DSL-2750E User Manual Page 9