D-Link DHP-301 Specifications download pdf (Page 15)

15D-Link DHP-300 User Manual

Section 3 - Conﬁguration

Click Next

Congure the PLC connected nodes rst (the remote DHP-300

which is not connected to the PC), and congure the ETH connected

node last (the local DHP-300 connected to the PC).

Note: If you conﬁgure the ETH node ﬁrst and change the Net ID or

Encryption Key, you will not have access to the PLC nodes.

To congure a DHP-300, select it and click Next to continue. If

you want to congure a node using Advance Conguration, skip

to page 18.

This screen shows the current conguration of the DHP-300. You

can modify any of the parameters and click Next to save your

conguration.

• Net ID: Powerline network name (case sensitive).

Default is DHP-300

• Encryption Key: Powerline network password (alphanumeric).

Default is DHP-300

• Password: Conguration Assistant password (alphanumeric).

Default is admin

• Alias: Device name (case sensitive).

Default is Device 1, Device 2, etc...

Note: Net ID and Encryption Key can be changed to prevent unauthorized access to your powerline network. Make

sure the Net ID and Encryption Key of the devices within your powerline network are the same to enable data

transmission.

Click Next

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

D-Link DHP-301 Specifications Page 15