D-Link DPR-2000 User Manual download pdf (Page 17)

Setting up the DPR-1040

D-Li

nk DPR-1040 Manual 13

Setting up the DPR-1040

Installing the Print Server

WARNING:

There may be configuration problems if the Print Server is turned on

without first establishing a network connection.

Follow the steps below to avoid any complications during the hardware installation:

1. Confirm that the printer you will use to connect to the DPR-1040 is operating

correctly.

2. When you have confirmed that the printer is operating correctly, switch its power

OFF.

3. Confirm that your network is operating normally.

4. Using a CAT 5 Ethernet cable, connect the DPR-1040 Ethernet Port (labeled LAN)

to the network.

5. While the printer is turned OFF, connect the USB printer cable to the printer and

then to the USB port on the Print Server.

6. Switch on the printer.

7. Insert the power adapter’s output plug into the DC 5V power socket on the rear

panel of the Print Server.

8. Connect the other end of the power adapter into a power outlet. This will supply

power to the Print Server. The blue LED on the Print Server’s front panel should turn

on.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 129 130

No comments

D-Link DPR-2000 User Manual Page 17