D-Link DP-G301 Installation Guide download pdf (Page 11)

When you enter the default IP address, the main screen of the Print Server’s con

ﬁguration will appear (see below). In addition to the product information, you can

access and control the Print Server’s conﬁguration through four links on the top of

this main screen: Home, Conﬁguration, Tools, and Help.

Please use an Ethernet connection for the conﬁguration of the DP-G301. Using

a CAT5 cable, connect the DP-G301 to the Ethernet-adapter equipped computer

in your network that you will be using for conﬁguration. Open your web browser

and type http://192.168.0.10 in the address box, and press Enter. This set of

numbers is the default IP Address of your Print Server. Please note that the PC’s

IP Address must correspond with the Print Server’s IP Address in the same

segment for the two devices to communicate.

Using the Web Conﬁguration

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 87 88

No comments

D-Link DP-G301 Installation Guide Page 11