D-Link DI-LB604/A User Manual download pdf (Page 29)

DI-LB604 User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

QoS Set Policy

Advanced > QoS > Set Policy

QoS Policy

Policy Name:

The friendly name of a policy which is used to classify the received

packets based on the following rules.

Setting the QoS policy can assign received packets a higher/lower priority (based on

your conﬁguration) to pass through this device. You can deﬁne some policies which

classify received packets based on local/remote IP addresses, ports and protocol type.

This feature is useful when the WAN link is very busy or congested or when using

special applications that need real time services such as Internet phone, video

conference...etc.

Local/Remote

Address:

Specify a packet based on local/remote IP address. By default,

the address is 0.0.0.0 which represents all IP Addresses. Port and

Protocol Type deﬁne all packets for special applications.

Protocol Type:

This ﬁeld is deﬁned for which type of packet. It has some values

such as IP, TCP and UDP.

Source/

Destination Port:

Specify the port number ranges if TCP or UDP protocol is

selected.

Priority Queue:

This device supports four queues. When a packet meets a policy

rule requirement, it will be put into the responding queue. Otherwise

it is assigned the lowest priority to pass through.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

No comments

D-Link DI-LB604/A User Manual Page 29