D-Link DSL-2500U User Manual download pdf (Page 16)

DSL-2500U ADSL/Ethernet Router

User Manual

Installation and Connection

Saving and Restoring Settings

Note that you should regularly save the changes of the router's settings to the non-

volatile memory.

The router's web-based interface displays the notification on unsaved changes at the top of the page.

Figure 10. The notification on unsaved changes.

You can save the router's settings via the top-page menu displayed when the mouse pointer is over

the System caption.

Figure 11. The top-page menu.

Click the Reboot line if you have already saved the router's settings.

Click the Save&Reboot line to save new settings and immediately reboot the router.

Click the Save line to save new settings to the non-volatile memory and continue configuring the

device. Also you can save the device's parameters via the Save button on the System /

Configuration page.

Click the Backup line and follow the dialog box appeared to save the configuration (all settings of

the router) to your PC. Also you can save the router's configuration to your PC via the Backup

button on the System / Configuration page.

Click the Factory line to restore the factory default settings. Also you can restore the factory

defaults via the Factory button on the System / Configuration page.

Also you can restore the factory default settings via the hardware Reset button located on the back

panel of the router. Use a small paperclip to activate the button; insert it into the hole (with the

device turned on), push, and hold for 7-10 seconds. Release the button and wait until the router is

rebooted (about a minute). Now you can access the web-based interface of the router using the

default IP address, username and password.

When you have configured all needed settings, click the Logout line.

Page 16 of 63

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

No comments

D-Link DSL-2500U User Manual Page 16