D-Link DSL-500G User Manual download pdf (Page 37)

DSL-500G ADSL Router User’s Guide

EOA Configuration

Ethernet-over-ATM (EOA) is a commonly used protocol for data transfer between Ethernet LANs and wide area

networks that use the ATM protocol. Telecommunications industry networks often use the ATM in the within

the their primary infrastructure or backbone. Network service providers that sell DSL services often use the EOA

protocol for data transfer with their customers’ DSL Routers.

EOA is implemented to create a bridged connection between a DSL Router and the ISP. In a bridged connection,

data is shared between the ISP’s network and their customer’s as if the networks were on the same physical LAN.

Bridged connections do not use the IP protocol. EOA can also be configured to provide a routed connection with

the ISP, which uses the IP protocol to exchange data.

This section describes how to configure an Ethernet-over-ATM interface on the Router, if one is needed to

communicate with your ISP.

Before creating an EOA interface or modifying the default settings, contact your ISP to determine which type of

protocol they use.

IMPORTANT

Your ISP may use a protocol other than EOA for communication with the Router, such

as the point-to-point protocol (PPP). One type of PPP, named PPP over Ethernet

(PPPoE), actually works “on top” of the EOA protocol. The other type, PPP over ATM

(PPPoA), does not. However, if your ISP uses either type of PPP, you do not need to

separately create an EOA interface. If your service provider has given you PPP

software for installation on your computer, follow the instructions given to you by your

ISP and do not change the EOA settings.

To view your current EOA configuration, log into the Configuration Manager, click the EoA button in the

Bridging folder, the EOA Configuration page appears:

Figure 15. EOA Configuration

To define EOA settings for a new virtual connection, click the Add button. To modify an existing EOA setting,

click the pencil icon (

) for that set. When you choose to add a new set or modify an existing set, a new menu

appears (see below). To delete an existing AAL5 setting, click the trashcan (

) for that set.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 65 66

No comments

D-Link DSL-500G User Manual Page 37