D-Link DCS-5605 User Manual download pdf (Page 63)

62D-Link DCS-5605/DCS-5635 User Manual

I/O Connector Denition for the Camera

The DCS-5605/DCS-5635 provides a general I/O terminal block with one digital input and one relay switch for device control. Pin 1 and

pin 2 can be connected to an external sensor and the state of voltage will be monitored from the initial state ‘LOW’. The relay switch of

pin 3 and pin 4 can be used to turn on or off the external device.

The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of

external alarm devices to the Camera such as IR-Sensors and alarm relays.

The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.

External I/O Port

1 DI+ INPUT (Max. 50mA, 12VDC)

2 DI- INPUT (Initial state of DI is low)

3 SW_COMMON OUTPUT (open from SW_OPEN at initial state)

(close with SW_OPEN when set DO to ON)

4 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC)

I/O Connector

The I/O connector on the camera provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting

such external alarm devices as IR-Sensors and alarm relays to the PTZ IP camera.

Digital Output

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 97 98

No comments

D-Link DCS-5605 User Manual Page 63