D-Link DCS-6005L Installation Guide download pdf (Page 6)

DCS-6004L / DCS-6005L

ENGLISH

ADJUSTING VIEWING ANGLE

Step 1:

The camera housing needs to be separated from the camera base

to expose the screw used to adjust the viewing angle. Remove the

camera housing from the camera base by squeezing the housing

release buttons on either side of the camera.

Step 2:

Lift the camera housing up off the camera base once the housing

has been released.

Step 3:

Use a philips head screwdriver to loosen the retaining screw used to

secure the viewing angle of the camera lens.

Step 4:

Manually adjust the viewing angle back and forth to your desired

location.

Step 6:

Reattach the camera housing by lining up the housing so that the

access port on the housing matches the access port on the camera

base. Firmly push down until the camera housing snaps back onto

the camera base.

Step 5:

Use a philips head screwdriver to tighten the retaining screw used to

secure the viewing angle of the camera lens.

1 2 3 4 5 6 7 8 9

No comments

D-Link DCS-6005L Installation Guide Page 6