D-Link DAP-1150 User Manual download pdf (Page 56)

56D-Link DAP-1150 User Manual

Section 4 - Security

Congure WPA-PSK, WPA2-PSK,

and WPA2-Auto-PSK (Personal)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please

establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption

due to the added overhead.

1. Log into the web-based conguration utility

by opening a web browser and entering the

device name of the access point (dlinkap).

Click on Wireless Settings on the left

side.

2. Next to Security Mode, select Enable

WPA Wireless Security, E n a b l e

WPA2 Wireless Security, or Enable

WPA2-Auto Wireless Security.

3. Next to Cipher Mode, select TKIP, AES, or

Auto.

4. Next to PSK / EAP, select Personal.

5. Next to Passphrase, enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters

long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all

other wireless clients. Enter the passphrase again next to Conrmed Passphrase.

7. Click Save Settings to save your settings. If you are conguring the access point with a wireless adapter, you will

lose connectivity until you enable WPA-Personal, WPA2-Personal, or WPA2-Auto-Personal on your adapter and

enter the same passphrase as you did on the access point.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 76 77

No comments

D-Link DAP-1150 User Manual Page 56