D-Link DWL-1800 Specifications

ManualBuilding Networks for PeopleD-Link AirPremierDWL-2200APTM802.11g Wireless 108Mbps Access Point with PoEDownloaded from www.Manualslib.com manua

10Getting StartedOn the following pages we will show you an example of an Infrastructure Networkincorporating the DWL-2200AP.An Infrastructure network

11You will need broadband Internet access (a Cable or DSL-subscriber line intoyour home or office).Consult with your Cable or DSL provider for proper

12Getting Started (continued)Connecting PoE (Power over Ethernet)Connect one end of an Ethernet cable (included with your package) to theLAN port on t

13Note: if you have changed the default IP address assigned to the DWL-2200AP, make sureto enter the correct IP address.Using the Configuration MenuAf

14Using the Configuration Menu (continued)Home > WirelessChannel-6 is the default channel. All devices on the network must share the samechannel.Wi

15Using the Configuration Menu (continued)Home > LANLAN is short for Local Area Network. This is considered your internal network. These arethe IP

16Using the Configuration Menu (continued)Advanced > ModeThe DWL-2200AP can beconfigured to perform inany of four modes: aWireless Access Point;a W

17Using the Configuration Menu (continued)Advanced > PerformanceTransmitPower-Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum powe

18Using the Configuration Menu (continued)Click Apply to save the changesAccess Control-Select Disabled to disable the filters function.Select Accept

19 IEEE 802.11gUsing the Configuration Menu (continued)Advanced > Filters > WLAN PartitionWireless Band-Enabling this feature allows wireless cl

2ContentsPackage Contents ...3Introduction...

20Using the Configuration Menu (continued)Input up to four keys for encryption. You will select one ofthese keys in the valid key field.802.11g.Select

21Using the Configuration Menu (continued)When you selectWPA-EAP, you mustselect AES, AUTO orTKIP from the pulldown menu.Cipher Type-Select the interv

22Using the Configuration Menu (continued)Advanced > Encryption > WPA-PSKWhen you selectWPA-PSK, you mustenter a PassPhrase in thecorresponding

23Enter the subnet mask.Function Enable/DisableUsing the Configuration Menu (continued)Advanced > DHCP Server > Dynamic Pool SettingsInput the f

24Using the Configuration Menu (continued)Advanced > DHCP Server > Static Pool SettingsDHCP ServerControl-Enable or Disablethe DHCP functionhere

25Using the Configuration Menu (continued)Advanced > DHCP Server > Current IP Mapping ListCurrent DHCP Dynamic Pools-These are IP address pools

26Using the Configuration Menu (continued)Tools > AdminEnter a user name; admin is the default setting.User Name-To change your password, enter you

27Using the Configuration Menu (continued)Tools > SystemTools > FirmwareClick Restart toapply the systemsettings and restartthe DWL-2200AP.Apply

28Using the Configuration Menu (continued)Tools > Cfg FileTools > Misc.Browse for theconfigurationsettings that youhave saved to yourhard drive.

29Using the Configuration Menu (continued)Status > Device InfoThis window displaysthe settings of theDWL-2200AP, aswell as the Firmwareversion, and

3Contents of Package:D-Link AirPremier DWL-2200AP802.11g Wireless 108Mbps* Access Point with PoEPower over Ethernet base unitPower Adapter-DC 48V,

30Using the Configuration Menu (continued)HelpAt this window youcan access the helpscreens for the topicslisted.Status > Client InfoClient info is

31Using the AP ManagerDiscovering DevicesThe AP Manager is a convenient tool to manage the configuration of your network from acentral computer. With

32Using the AP Manager (continued)You can assign an IP address to an AP or assign IPaddresses to multiple AP’s by clicking on this buttonafter selecti

33Using the AP Manager (continued)Device ConfigurationClick on this button to access the configurationproperties of the selected device(s).The device

34Device Configuration>GeneralWhen selecting multiple devices for configuration, some options are unavailable forconfiguration as noted(*) below:•

35Using the AP Manager (continued)Device Configuration>Wireless• SSID: The Service Set (network)Identifier of your wireless network.• Channel: Allo

36Using the AP Manager (continued)Device Configuration>SecurityThe Security tab contains the WEP configuration settings on the intial page. If you

37Using the AP Manager (continued)Device Configuration>Security>WPA-EAP• Cipher Type: Select auto, TKIP, or AESfrom the pulldown menu.• Group Ke

38Using the AP Manager (continued)Device Configuration>Filters• Internal Station Connection: Enablingthis allows wireless clients tocommunicate wit

39Using the AP Manager (continued)Device Configuration>DHCP• DHCP Server: Enable or disable theDHCP server function..• IP Assigned From: Enter the

4IntroductionAt up to fifteen times the speed of previous wireless devices (maximum wireless signalrate of up to 108Mbps* in Super G mode), you can wo

40Using the AP Manager (continued)You must always clickApply in the Configurationwindow if you want thesettings to take effect.To load a previously sa

41Using the AP Manager (continued)You can customize the basic System Settingsfor the DWL-2200AP by clicking on this button.System Settings• Access Pas

42Using the AP Manager (continued)Enter a Password and retype it inthe Verify Password field.Click NextClick NextEnter the SSID and theChannel for the

43Using the AP Manager (continued)The DWL-2200AP setup is complete!If you want to enable Encryption,enter the Encryption values here.Click NextClick F

44Using the AP Manager (continued)RefreshAboutClick on this button to refresh the listof devices available on the network.Click on this button to view

451.The computer used to configure the DWL-2200AP cannot accessthe configuration menu.Check that the Ethernet LED on the DWL-2200AP is ON. If theLED i

46Troubleshooting (continued)Make sure the wireless client is associated and joined with the correct access point. Tocheck this connection: Right-clic

47Troubleshooting (continued)Click Device ManagerSelect the Hardware TabGo to Start > My Computer >PropertiesCheck to make sure that the rout

48Troubleshooting (continued)Click on theplus sign nextto NetworkAdaptersRight-click on D-LinkAirPlus DWL-G650Wireless CardbusAdapter (In this e

49Troubleshooting (continued)5. Why does my wireless connection keep dropping?Antenna Orientation- Try different antenna orientations for the DWL-220

5ConnectionsPressing the Reset Buttonrestores the DWL-2200AP toits original factory defaultsettings.The LAN Port is Auto-MDI/MDIX. You caninsert eithe

50Troubleshooting (continued)6. Why can’t I get a wireless connection? (continued)Turn off your DWL-2200AP and the client. Turn the DWL-2200AP back o

51To hard-reset the D-Link DWL-2200AP to the Factory Default Settings, please do thefollowing:Troubleshooting (continued)After the DWL-2100AP rebo

52Technical SpecificationsStandards• IEEE 802.11b• IEEE 802.11g• IEEE 802.3• IEEE 802.3af• IEEE 802.3u• IEEE 802.3xDevice Management• Web-Based – Inte

53Antenna Type• Dipole antenna with 5dBi gainOperating Voltage• 48VDC +/- 10% for PoERadio and Modulation TypeFor 802.11b:DSSS:• DBPSK @ 1Mbps• DQPSK

54LEDs• Power• 10M/100M• WLANTemperature• Operating: 32ºF to 104ºF (0ºC to 40ºC)• Storing: -4ºF to 149ºF (-20ºC to 65ºC)Humidity• Operating: 10%~90% (

55You can find software updates and user documentation on the D-Link website.D-Link provides free technical support for customers within the United S

56Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limitedwarranty for its product only to the pers

57• The original product owner must obtain a Return Material Authorization (“RMA”) number from theAuthorized D-Link Service Office and, if requested,

58Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Somestates do not allow exclusion or limitation of i

6Features 4 Different Operation modes - Capable of operating in one of four differentoperation modes to meet your wireless networking requirements:

7Wireless BasicsWireless users can use the same applications they use on a wired network. Wirelessadapter cards used on laptop and desktop systems sup

8Wireless Basics (continued)Standards-Based TechnologyThe DWL-2200AP Wireless Access Point utilizes the 802.11b and the 802.11g standards.The IEEE 802

9Wireless Basics (continued)Installation ConsiderationsThe D-Link AirPremier DWL-2200AP lets you access your network, using a wirelessconnection, from