D-Link DWL-2600AP User Manual download pdf (Page 87)

Unied Access Point Administrator’s Guide

Page 87

March 2012

Section 7 - Maintaining the Access Point

Field Description

Remote Capture

Port

Specify the remote port to use as the destination for packet captures. (range 1 to 65530).

Table 50 - Remote Packet Capture

Packet Capture File Download

Packet Capture File Download allows you to download the capture le by TFTP to a congured TFTP server or by

HTTP(S) to a PC. The captured packets are stored in le /tmp/apcapture.pcap on the AP. A capture is automatically

stopped when the capture le download command is triggered.

Because the capture le is located in the RAM le system, it disappears if the AP is reset.

Figure 57 - Packet Capture File Download

The following table describes the elds to congure the packet capture status.

Field Description

Use TFTP to

download the

capture le

Select or clear this option to determine whether to use TFTP or HTTP(S) to download the

capture le:

•) To download the le by using TFTP, select this option and complete the additional

elds.

•) To download the le by using HTTP or HTTPS, clear this option and click Download to

browse to the location where the le is to be saved.

TFTP Server

Filename

When using TFTP to download the le, specify a name for the packet capture le, including

the .pcap le name extension and the path to the directory where you want to save the le.

Server IP When using TFTP to download the le, specify the IP address of the TFTP server.

Table 51 - Packet Capture File Download

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 127 128

No comments

D-Link DWL-2600AP User Manual Page 87