D-Link DWL-510 Installation Guide download pdf (Page 14)

SSID: (Service Set

Identiﬁer) Default is

the default setting. The

SSID is a unique name

that identiﬁes a network.

All devices on a network

must share the same

SSID name in order to

communicate on the

network. If you choose to

change the SSID from the

default setting, input your

new SSID name in this

ﬁeld.

Channel: Channel 6 is

the default channel. Input a

new number if you want to

change the default setting.

All devices on the network must be set to the same channel to communicate on the

network.

Authentication:

When WPA is selected ﬁll in the following ﬁelds:

RADIUS Server 1 IP: Enter the IP address of the RADIUS server.

Port: Enter the Port number here.

Shared Secret: Enter the shared secret here.

Apply: Click Apply to apply the changes.

Using the Conﬁguration Utility in AP Mode (continued)

Home > Wireless > WPA

Select WPA to select Wi-Fi Protected Access in conjunction with a

RADIUS server in your network.

RADIUS Server 2 IP: Enter the IP address of the RADIUS server.

Port: Enter the Port number here.

Shared Secret: Enter the shared secret here.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 78 79

No comments

D-Link DWL-510 Installation Guide Page 14