D-link DES-3224 User Manual download pdf (Page 14)

10/100 Auto Negotiation Switch User’s Guide

Introduction

There are heat vents located on the side opposite the fans. The fans and the vents help to cool

the DES-3224. Always leave two inches of space around the DES-3224 so that air can

circulate and cool the DES-3224.

Rear Panel

The three pronged power plug, female RS-232 Console port and rear fan are located at the

rear of the DES-3224, displayed in Figure 3. When installing the DES-3224, leave enough

room to allow you to unplug the power cable if necessary and to attach the RS-232 cable for

Local Console Management.

Figure 3: Rear Panel

Management Methods

The DES-3224 supports three management methods:

•

Local Console Management

•

Telnet Management

•

D-View/ SNMP Management

Local Console Management

Local Console Management is done through the RS-232 Console port. The RS-232 port is

located at the rear of the DES-3224. Managing the DES-3224 in this mode requires a direct

connection between a PC and the DES-3224.

Telnet Management

Telnet is done over the network. Once the DES-3224 is on the network, you can use Telnet to

D-View/ SNMP Management

The DES-3224 supports SNMP through D-View, D-Link’s proprietary SNMP application

and through other vendors’ SNMP applications. Please refer to the appropriate

documentation for instructions on installing and using D-View and other SNMP applications.

RS-2 3 2 Po rt Fa n

Three Prong Power Plug

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 74 75

No comments

D-link DES-3224 User Manual Page 14