D-Link DKVM-8E User Manual

DKVM-8E 8- Port Keyboard, Video, and Mouse Switch User’s Guide Rev. 2.0

- 8 - Now the PC connections will be made with the monitor (VGA) connections first. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side t

- 9 - Step 7 Connect the first computer’s keyboard cable to the DKVM-8E. Using another PS/2 cable connect one end to PS/2 keyboard port on the comput

- 10 - NOTE: Please be remind to plug in power adapter. Although the PCs connected to DKVM-8E are able to support enough power to the stand alone swi

- 11 - Usage The power on state of DKVM-8E When you power on KVM switch, it will ask for the password, the default password value is eight zero –“

- 12 - Display LED Indication You can press the button in order like mentioned-above diagram. When you select one of eight PC ports and this PC i

- 13 - Lock” “Scroll Lock” key), the keyboard will back to under Operation System control state. Below are the different hot key commands within 2

- 14 - Note: Bank no. and port no. selection must be made using the numeric keys on the keyboard. Numeric keys on the keypad are not available as a

- 15 - Note: 1. Rom re-flash command need take 1~2 minutes. 2. The password is not included in this re-flash. + + =

- 16 - console port (white color block) of bank 2 KVM switch. 3. Please repeat item 2 to daisy chain more bank as you want. But, the maximum daisy ch

- 17 - 1. A PC can be disconnected and reconnected to the same or different port of the DKVM-8E without having to power it off as long as it is not

TABLE OF CONTENTS Introduction... 1 Product Feature ...

- 18 - On Screen Display Operation When you pop up the OSD manual window go through the hot key, you will see the following small window on your mon

- 19 - default of 8 port KVM switch PC name is from “SYSTEM 01”, “SYSTEM 02”,…, “SYSTEM 08”. Z The sun symbol “☼ “ beside the PC name shows that the

- 20 - You need to retype the password again for rechecking your previous key-in password is matched or not. ^ “CONSOLE ON/OFF“ l

- 21 - _ To use up arrow key “y“ or down arrow key “z“ to select port for destination PC name. After you have selected the PC port already, you can p

- 22 - keys in order. The Display LEDs on the front panel will be flashed during the refresh process. When the OSD value back to default setting,

- 23 - Trouble Shooting General Problems Q: The OSD menu does not display a “☼“ on a channel where a computer is connected and powered up. What do

- 24 - Monitor/Video Problems Q: I am getting ghosting shadowing or fuzzy images on my monitor. What do I do? A: ˙Check the cables and make sure they

- 25 - PC, whether stand-alone or connected to a DKVM-8E. Q: The computers boot up fine, but the keyboard does not work. A: ˙Check the cables and ma

- 26 - ˙Make sure the mouse is directly plugged into the computer. Rebooting is necessary when trying this. If the computer still does not detect

- 27 - A : Switch the console port to the problem PC port and power on this PC again to get the mouse. Problems with power supply Q: The po

- 1 - Introduction The DKVM-8E gives you the ultimate in control of 8 PCs from one keyboard, mouse and monitor. To expand control ability, the Dais

- 28 - Specification  Computer Connections : 8  Display LED Indication : 3  Keyboard : 6-pin Mini-DIN  Mouse : 6-pin Mini-DIN  Monitor :

- 4 - Hardware Installation This section will explain how to connect the console and the computers to the DKVM-8E switch unit. First the layout of fr

- 5 - Real Panel Layout Installation Please follow the steps below closely and in the order as shown, otherwise, keyboard and/or

- 6 - Step 1 Find a convenient place to put your DKVM-8E. Its 19” rack mount form factor makes it ideal mountable on 19” rack. When mounting to a ra

- 7 - Step 3 Connect the keyboard to the DKVM-8E. Step 4 Connect the mouse to the DKVM-8E. Step 5