D-Link DWC-1000 User Manual download pdf (Page 149)

Wireless Controller User Manual

148

Setup > VPN Settings > SSL VPN Client > Configured Client Routes

If the SSL VPN client is assigned an IP address in a different subnet than the

corporate network, a client route must be added to allow access to the private LAN

through the VPN tunnel. As well a static route on the private LAN‘s firewall

(typically this controller) is needed to forward private traffic through the VPN

Firewall to the remote SSL VPN client. When split tunnel mode is enabled, the user is

required to configure routes for VPN tunnel clients:

 Destination network: The network address of the LAN or the subnet

information of the destination network from the VPN tunnel clients‘

perspective is set here.

 Subnet mask: The subnet information of the destination network is set here.

Figure 101: Configured client routes only apply in split tunnel mode

7.4.1 Creating Portal Layouts

Setup > VPN Settings > SSL VPN Server > Portal Layouts

The controller allows you to create a custom page for remote SSL VPN users that is

presented upon authentication. There are various fields in the portal that are

customizable for the domain, and this allows the controller administrator to

communicate details such as login instructions, available services, and other usage

details in the portal visible to remote users. During domain setup, configured portal

layouts are available to select for all users authenticated by the domain.

 The default portal LAN IP address is https://192.168.10.1/scgi-

bin/userPortal/portal. This is the same page that opens when the ―User Portal‖

link is clicked on the SSL VPN menu of the controller GUI.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 180 181

No comments

D-Link DWC-1000 User Manual Page 149