D-Link DES-1526 Specifications download pdf (Page 24)

For legacy devices that are not yet compatible, the PoE port will

not offer the power to these devices. This feature allows users to

freely and safely mix legacy and Power over Ethernet compatible

devices on their network.

These ports support network speeds of either 10Mbps or

100Mbps, and can operate in half- and full-duplex transfer

modes. These ports also support the automatic MDI/MDIX

crossover detection function, providing true “plug and play”

capability. Just plug-in the network cable to the hub directly and

regardless if the end node is a NIC (Network Interface Card) or

switch and hub.

1000BASE-T Gigabit Ethernet Ports (Port 25~26):

The Switch is equipped with two Gigabit twisted pair ports,

supported auto negotiable 10/100/1000Mbps and auto

MDI/MDIX crossover detection function. These two ports can

operate in half-duplex mode for 10/100Mbps and full-duplex

mode for 10/100/1000Mbps.

Note: When the port is set to “Forced Mode”, the Auto MDI/MDIX

will be disabled.

mini-GBIC Ports (Port 25F~26F):

The Switch is equipped with two mini-GBIC ports, which

supports optional 1000BASE-SX/LX mini-GBIC modules.

Note: Port 25 and 26 are the same ports with the mini-GBIC Port

25F and 26F ports, when plug in the mini-GBIC module, the device

will activate mini-GBIC, and the RJ-45 port will be disabled.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 94 95

No comments

D-Link DES-1526 Specifications Page 24