D-Link DES-3326SR Specifications

D-Link ™ DES-3326SR 24-Port Layer 3 Stackable Switch With Optional RPS Support Manual May 2005 651SR3326S035

D-Link DES-3326SR Layer 3 Switch Use caution when pressing the component rail release latches and sliding a component into or out of a rack; the slide

D-Link DES-3326SR Layer 3 Switch 802.1X Port-based Network Access Control The Switch is an implementation of the server side of IEEE 802.1X-Port Based

D-Link DES-3326SR Layer 3 Switch DES-3326S Switch Figure 14- 15. Typical 802.1X Configuration with User Authentication The user’s information, inclu

D-Link DES-3326SR Layer 3 Switch Table 2. Conformance to IEEE 802.1X Standards State Machine Name Port Timers state machine Authenticator PAE state m

D-Link DES-3326SR Layer 3 Switch 802.1X Port Settings Existing 802.1X port settings are displayed and can be con figured using the menu below. Figu

D-Link DES-3326SR Layer 3 Switch Figure 14- 19. 802.1X Port Settings – Edit Configure the following 802.1x port settings: Parameter Description Po

D-Link DES-3326SR Layer 3 Switch Port Capability Click the selection button on the far left that corresponds to the port you want to configure and cl

D-Link DES-3326SR Layer 3 Switch Initialize Ports Use this to initialize the 802.1x functions on specified ports or for specified MAC addresses operat

D-Link DES-3326SR Layer 3 Switch Re-Authenticate Ports 802.1x ports must be periodically re-authenticated (when the re-authentication period lapses).

D-Link DES-3326SR Layer 3 Switch Radius Server Settings Use this menu to configure the settings the switch will use to communicate with a Radius serve

D-Link DES-3326SR Layer 3 Switch Chapter 15 SNMP Network Management SNMP View Table SNMP Group Table SNMP Community Table SNMP Engine ID SNMP Hos

D-Link DES-3326SR Layer 3 Switch Chapter 1 Introduction Switch Description Features Front Panel Components LED Indicators Rear Panel Description Plug

D-Link DES-3326SR Layer 3 Switch SNMP View Table The SNMP View Table is used to assign views to community strings that define which MIB objects can be

D-Link DES-3326SR Layer 3 Switch SNMP Group Table The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the vi

D-Link DES-3326SR Layer 3 Switch Parameter Description Group Name Type an alphanumeric string of up to 32 characters. This is used to identify the

D-Link DES-3326SR Layer 3 Switch To delete an existing entry, click the selection button on the far left that corresponds to the port you want to conf

D-Link DES-3326SR Layer 3 Switch SNMP Host Table Use the SNMP Host Table to set up trap recipients. Figure 15- 8. SNMP Host Table To delete an exist

D-Link DES-3326SR Layer 3 Switch SNMP User Table Use the SNMP User Table to create a new SNMP user and add the user to an existing SNMP group or to a

D-Link DES-3326SR Layer 3 Switch Security IP Management Management Stations IP Addresses designate stations that are allowed to make configuration cha

D-Link DES-3326SR Layer 3 Switch Chapter 16 Network Monitoring and Statistics Port Utilization Statistics Port Packets Statistics MAC Address Table I

D-Link DES-3326SR Layer 3 Switch Port Utilization Statistics Port Utilization can be viewed for individual ports using the Line Chart or you can opt

D-Link DES-3326SR Layer 3 Switch Port Packet Statistics Packets statistics are viewed in the following menus: Port Packet Analysis Port Error Packets

D-Link DES-3326SR Layer 3 Switch Features • 8.8 Gbps Switching fabric capacity • Supports 802.1w Rapid Spanning Tree and 802.1D STP compatible opera

D-Link DES-3326SR Layer 3 Switch The packet analysis fields are described here: Parameter Description Update Interval <Suspend> The interval (

D-Link DES-3326SR Layer 3 Switch The following fields from above are described in more detail: Parameter Description Unit Allows the selection of a

D-Link DES-3326SR Layer 3 Switch MAC Address Table This allows the switch’s dynamic MAC address forwarding table to be viewed. When the switch learns

D-Link DES-3326SR Layer 3 Switch Routing Table To view Routing Table, open the Network Monitoring folder and the Address Tables subdirectory and click

D-Link DES-3326SR Layer 3 Switch ARP Table To view ARP Table, open the Network Monitoring folder and the Address Tables subdirectory and click on the

D-Link DES-3326SR Layer 3 Switch OSPF Information To view information relevant to OSPF operations, open the Network Monitoring and use the links loca

D-Link DES-3326SR Layer 3 Switch OSPF Neighbor Table Figure 16- 9. OSPF Neighbor Table The following fields are displayed. Parameter Description N

D-Link DES-3326SR Layer 3 Switch DVMRP Information To view DVMRP information, open the Network Monitoring folder and use the links located in a separa

D-Link DES-3326SR Layer 3 Switch DVMRP Neighbor Address Table Figure 16- 12. DVMRP Neighbor Table The following fields are displayed. Parameter De

D-Link DES-3326SR Layer 3 Switch PIM Neighbor Address Table Multicast routers use Protocol Independent Multicast (PIM) to determine which other multic

D-Link DES-3326SR Layer 3 Switch Front Panel Components The front panel of the Switch consists of LED indicators, an RS-232 communication port, a slid

D-Link DES-3326SR Layer 3 Switch Router Ports This displays which of the switch’s ports are currently configured as router ports. A router port config

D-Link DES-3326SR Layer 3 Switch IGMP Snooping Group Table This allows the Switch’s IGMP Snooping table to be viewed. IGMP Snooping allows the switch

D-Link DES-3326SR Layer 3 Switch Specify the VLAN and click on the Find button. The following information is displayed in the IGMP Snooping Forwardin

D-Link DES-3326SR Layer 3 Switch IP Multicast Forwarding Table To browse the IP Multicast Forwarding table, open the Network Monitoring folder and the

D-Link DES-3326SR Layer 3 Switch Switch History This allows the Switch History Log to be viewed. The Switch records all traps, in sequence, that ident

D-Link DES-3326SR Layer 3 Switch Chapter 17 Switch Utilities Download Firmware Download Configuration File Save Settings to TFTP Server Save Switch Hi

D-Link DES-3326SR Layer 3 Switch Download Configuration File To download a configuration file for the switch’s, click on the Basic Setup folder and th

D-Link DES-3326SR Layer 3 Switch Save History Log to Server To download a configuration file for the switch’s, click on the Basic Setup folder and the

D-Link DES-3326SR Layer 3 Switch DHCP, BOOTP and DNS Relay Use DHCP/BOOTP and DNS Relay configuration to allow the Switch to relay DHCP/BOOTP and DNS

D-Link DES-3326SR Layer 3 Switch BOOTP/DHCP Relay Interface Configuration To configure BOOTP relay for individual IP interfaces, use the DHCP/BOOTP Re

D-Link DES-3326SR Layer 3 Switch Stacking LED Indicators Stacking LED indicators include the Stack ID indicator on the front panel and the Link/Act in

D-Link DES-3326SR Layer 3 Switch DNS Relay To configure DNS Relay, click on the DNS Relay link: Figure 17- 9. DNS Relay The DNS Relay Information m

D-Link DES-3326SR Layer 3 Switch DNS Relay Interface Configuration To configure permanent entries for the DNS Relay Static Table, use the DNS Relay S

D-Link DES-3326SR Layer 3 Switch Chapter 18 VLANS AND IP INTERFACES VLANs can function somewhat differently in a Layer 3 Switch, that is when the VLAN

D-Link DES-3326SR Layer 3 Switch Understanding 802.1Q VLANs This review of 802.1Q VLANs presents some basic background about how VLANs work according

D-Link DES-3326SR Layer 3 Switch 802.1Q VLAN Tags The figure below shows the 802.1Q VLAN tag. There are four additional octets inserted after the sou

D-Link DES-3326SR Layer 3 Switch in the Switch’s forwarding table). If the PVID of the port that received the packet is different from the PVID of th

D-Link DES-3326SR Layer 3 Switch Chapter 19 Configure VLANs Configure 802.1Q Static VLANs 802.1Q Port Settings Switch GVRP This chapter describes ho

D-Link DES-3326SR Layer 3 Switch Figure 19- 2. 802.1Q Static VLANs Entry Settings – Add To edit an existing 802.1Q VLAN, click the corresponding cl

D-Link DES-3326SR Layer 3 Switch The following fields can then be set in either the Add or Edit dialog boxes: Parameter Description Unit Choose the

D-Link DES-3326SR Layer 3 Switch 802.1Q Port Settings The Port VLAN ID (PVID) menu, shown below, allows you to determine whether the switch will shar

D-Link DES-3326SR Layer 3 Switch Rear Panel Description The rear panel of the Switch contains an AC power connector. Figure 1 - 3. Rear panel view

D-Link DES-3326SR Layer 3 Switch Switch GVRP To enable GVRP for the Switch, access the Switch GVRP menu in the VLAN Configurations folder, select Enab

D-Link DES-3326SR Layer 3 Switch Chapter 20 IP Interface Configuration To configure IP interfaces, first set up VLANs, then access the IP Interface Se

D-Link DES-3326SR Layer 3 Switch Figure 20- 1. Setup IP Interface To setup an new IP interface, click the New button: Figure 20- 2. Setup IP Interf

D-Link DES-3326SR Layer 3 Switch Choose a name for the interface to be added and enter it in the Interface Name field (if you are editing an IP Interf

D-Link DES-3326SR Layer 3 Switch Chapter 21 Multicast Routing Configuration Multicast Global Configurations IGMP Snooping Settings IGMP Interface Con

D-Link DES-3326SR Layer 3 Switch IGMP Snooping Settings To configure IGMP Snooping, click the IGMP Snooping Configurations to open the following menu:

D-Link DES-3326SR Layer 3 Switch The following fields can be set: Parameter Description VLAN Name Allows the entry of the name of the VLAN for whic

D-Link DES-3326SR Layer 3 Switch IGMP Interface Configuration IGMP for IP interfaces function the same way they do for individual ports or VLANs in La

D-Link DES-3326SR Layer 3 Switch NOTE: The Robustness Variable field allows IGMP to be ‘tuned’ for sub-networks that are expected to lose many packe

D-Link DES-3326SR Layer 3 Switch DVMRP Interface Configuration To configure DVMRP for an IP interface, Click the DVMRP Interface Configurations link f

D-Link DES-3326SR Layer 3 Switch Optional Plug-in Modules The DES-3326SR 24-port Fast Ethernet Switch is able to accommodate a range of optional plug-

D-Link DES-3326SR Layer 3 Switch The following fields for DVMRP can be set: Parameter Description Interface Name <System> Displays the name

D-Link DES-3326SR Layer 3 Switch To configure PIMDM for an IP interface, click the PIMDM Interface Configuration link under the IP Multicast Routing P

D-Link DES-3326SR Layer 3 Switch Chapter 22 Static Route, Static ARP and RIP Configuration Configure Static Routes Configure Static ARP Routing Infor

D-Link DES-3326SR Layer 3 Switch The following fields can be set: Parameter Description IP Address <0.0.0.0> Allows the entry of an IP address

D-Link DES-3326SR Layer 3 Switch Routing Information Protocol (RIP) Configuration To setup RIP for the IP interfaces configured in the Switch, open th

D-Link DES-3326SR Layer 3 Switch The following RIP settings can be applied to each IP interface: Parameter Description Interface Name The name of the

D-Link DES-3326SR Layer 3 Switch Chapter 22 Introduction to OSPF The Open Shortest Path First (OSPF) routing protocol that uses a link-state algorithm

D-Link DES-3326SR Layer 3 Switch OSPF Cost Each OSPF interface has an associated cost (also called “metric”) that is representative of the overhead re

D-Link DES-3326SR Layer 3 Switch Router ARouter BRouter CRouter D128.213.0.0192.213.11.0222.211.10.001010551010 Figure 23- 2. Constructing a Shortest

D-Link DES-3326SR Layer 3 Switch Areas and Border Routers OSPF link-state updates are forwarded to other routers by flooding to all routers on the net

D-Link DES-3326SR Layer 3 Switch DES-131F/132F 1/2-port 100BASE-FX Module Figure 1 - 6. 100BASE-FX two-port module Port Functions • Fully complian

D-Link DES-3326SR Layer 3 Switch OSPF Authentication OSPF packets can be authenticated as coming from trusted routers by the use of predefined passwor

D-Link DES-3326SR Layer 3 Switch Neighbors Routers that are connected to the same area or segment become neighbors in that area. Neighbors are electe

D-Link DES-3326SR Layer 3 Switch Building Adjacency Two routers undergo a multi-step process in building the adjacency relationship. The following is

D-Link DES-3326SR Layer 3 Switch OSPF Packet HeaderTypePacket LengthRouter IDArea IDChecksumAuthentication TypeAuthenticationAuthenticationVersion No.

D-Link DES-3326SR Layer 3 Switch Hello Packet1Packet LengthRouter IDArea IDVersion No.Checksum Authentication TypeAuthenticationAuthenticationNetwork

D-Link DES-3326SR Layer 3 Switch Database Description PacketVersion No.2 Packet LengthRouter IDArea IDAuthentication TypeAuthenticationAuthenticationC

D-Link DES-3326SR Layer 3 Switch Version No.Packet LengthRouter IDArea IDAuthentication TypeAuthenticationAuthenticationChecksumLink-State Request Pac

D-Link DES-3326SR Layer 3 Switch The Link-State Acknowledgment Packet Link-State Acknowledgment packets are OSPF packet type 5. To make the folding o

D-Link DES-3326SR Layer 3 Switch The Link State Advertisement Header All link state advertisements begin with a common 20-byte header. This header co

D-Link DES-3326SR Layer 3 Switch Router Links Advertisements Router links advertisements are type 1 link state advertisements. Each router in an area

D-Link DES-3326SR Layer 3 Switch DES-131FL/132FL 1/2-port 100BASE-FX Module Figure 1 - 7. 100BASE-FX module Port Functions • Fully compliant with

D-Link DES-3326SR Layer 3 Switch Table 10. Routers Links Advertisements Field Description Type A quick classification of the router link. One of the

D-Link DES-3326SR Layer 3 Switch Network Links Advertisements Network links advertisements are Type 2 link state advertisements. A network links adve

D-Link DES-3326SR Layer 3 Switch Link-State AgeOptionsLink-State IDAdvertising RouterLink-State Sequence NumberLink-State ChecksumLength2Network Mask

D-Link DES-3326SR Layer 3 Switch Autonomous Systems External Link Advertisements Autonomous Systems (AS) link advertisements are Type 5 link state adv

D-Link DES-3326SR Layer 3 Switch Chapter 24 Configure OSPF MD5 Key Table Configuration Configure OSPF Settings OSPF Area Setting OSPF Interface Config

D-Link DES-3326SR Layer 3 Switch MD5 Key Table Configuration MD5 authentication is used to identify trusted routers sending OSPF packets. By default n

D-Link DES-3326SR Layer 3 Switch Configure OSPF Settings All the links for OSPF configuration menus are contained within a subdirectory of the Layer 3

D-Link DES-3326SR Layer 3 Switch To set up an OSPF Area configuration click the OSPF Area Settings link to open the following dialog box: Figure 24-

D-Link DES-3326SR Layer 3 Switch OSPF Interface Configuration To set up OSPF interfaces, click the OSPF Interface Settings link to view OSPF settings

D-Link DES-3326SR Layer 3 Switch The following fields can then be configured for the OSPF interface: Parameter Description Interface Name Displays the

D-Link DES-3326SR Layer 3 Switch DES-132T 2-port 1000BASE-T Module Figure 1 - 8. 1000BASE-T two-port module Port Functions • 2 1000BASE-T Gigabi

D-Link DES-3326SR Layer 3 Switch To add a new OSPF virtual interface configuration set to the table, click the New button. Figure 24- 11. Virtual In

D-Link DES-3326SR Layer 3 Switch Area Aggregation Configuration Area Aggregation allows all of the routing information that may be contained within an

D-Link DES-3326SR Layer 3 Switch OSPF Host Route Settings OSPF host routes work in a way analogous to RIP, only this is used to share OSPF information

D-Link DES-3326SR Layer 3 Switch Route Redistribution Settings Route redistribution allows routers on the network − that are running different routing

D-Link DES-3326SR Layer 3 Switch To edit an existing Route Redistribution entry on the switch, select the entry from the Route Redistribution screen

D-Link DES-3326SR Layer 3 Switch Appendix A Technical Specifications General Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Etherne

D-Link DES-3326SR Layer 3 Switch Physical & Environmental AC inputs: 100 - 240 VAC, 50/60 Hz (internal universal power supply) Power Consumption:

D-Link DES-3326SR Layer 3 Switch Appendix B Network Addressing and Protocols This appendix provides background information pertaining to Layer 3 IP n

D-Link DES-3326SR Layer 3 Switch The dots are included to make the numbers easier to read. Eight binary bits are called a ‘byte’ or an ‘octet’. An oc

D-Link DES-3326SR Layer 3 Switch For example, the IP address 10.42.73.210 is a Class A address, so the Network part of the address (called the Network

D-Link DES-3326SR Layer 3 Switch ____________________ Information in this document is subject to change without notice. © 2005 D-Link Corporation. A

D-Link DES-3326SR Layer 3 Switch DES-132G 2-port 1000BASE-SX Gigabit Ethernet Module Figure 1 - 9. 1000BASE-SX two-port module Port Functions • 2

D-Link DES-3326SR Layer 3 Switch Multiplying the number of subnets times the number of nodes gives 12,582,900 possible nodes. Note that this is less

D-Link DES-3326SR Layer 3 Switch Class B Subnet Masks # of Bits Subnet Mask CIDR Notation # of Subnets # of Hosts Total Hosts 2 255.255.192 /18 2

D-Link DES-3326SR Layer 3 Switch Internet Protocols This is a brief introduction to the suite of Internet Protocols frequently referred to as TCP/IP.

D-Link DES-3326SR Layer 3 Switch Figure B- 2. The Protocol Stack Between two protocol stacks, members of the same layer are known as peers and commun

D-Link DES-3326SR Layer 3 Switch Layer 4 This layer, known as the transport layer, establishes the communication path between user applications and th

D-Link DES-3326SR Layer 3 Switch TCP must know how large a packet the network can process. To do this, the TCP protocols at each end of a connection

D-Link DES-3326SR Layer 3 Switch The flags and fragment offset are used to keep track of packets that must be divided among several smaller packets t

D-Link DES-3326SR Layer 3 Switch TCP and UDP Well-Known Ports Application protocols run ‘on top of’ TCP/IP. When an application wants to send data o

D-Link DES-3326SR Layer 3 Switch The UDP header is shorter than a TCP header. UDP also uses a checksum to verify that data is received uncorrupted.

D-Link DES-3326SR Layer 3 Switch DHCP Servers The Dynamic Host Configuration Protocol (DHCP) is used to dynamically assign a TCP/IP network configurat

D-Link DES-3326SR Layer 3 Switch DES-132GL 2-port 1000BASE-LX Gigabit Ethernet Module Figure 1 - 10. 1000BASE-LX two-port module Port Functions • 2

D-Link DES-3326SR Layer 3 Switch Appendix C IP Routing, Multicasting, Multicast Routing and Routing Protocols IP handles the task of determining how p

D-Link DES-3326SR Layer 3 Switch ARP The Address Resolution Protocol (ARP) determines the MAC address and IP address correspondence for a network devi

D-Link DES-3326SR Layer 3 Switch Multicasting Multicasting is a group of protocols and tools that enable a single source point to send packets to grou

D-Link DES-3326SR Layer 3 Switch Internet Group Management Protocol (IGMP) End users that want to receive multicast packets must be able to inform nea

D-Link DES-3326SR Layer 3 Switch The router with the lowest IP address is elected as the querier. The explicit group leave message is added to decrea

D-Link DES-3326SR Layer 3 Switch Reverse Path Broadcasting (RPB) The Reverse Path Broadcasting (RPB) algorithm is an enhancement of the multicast span

D-Link DES-3326SR Layer 3 Switch shortest path back to the multicast source, or that have no active multicast group members. A ‘graft’ message is add

D-Link DES-3326SR Layer 3 Switch RIP Version 1 Message Format There are two types of RIP messages: routing information messages and information reques

D-Link DES-3326SR Layer 3 Switch The distances, measured in router hops are entered in the Distance to Source Network, and Distance to Destination Net

D-Link DES-3326SR Layer 3 Switch Glossary 100BASE-FX: 100Mbp Ethernet implementation over fiber. 100BASE-TX: 100Mbps Ethernet implementation over Cate

D-Link DES-3326SR Layer 3 Switch DES-132GB 2-port GBIC-based Gigabit Ethernet Module Figure 1 - 11. GBIC two-port module Port Functions • 2 GBIC-ba

D-Link DES-3326SR Layer 3 Switch LAN: Local Area Network. A network of connected computing resources (such as PCs, printers, servers) covering a relat

D-Link DES-3326SR Layer 3 Switch LIMITED WARRANTY D-Link provides this limited warranty for its product only to the person or entity who originally p

D-Link DES-3326SR Layer 3 Switch What You Must Do For Warranty Service: Registration Card. The Registration Card provided at the back of this manual

D-Link DES-3326SR Layer 3 Switch Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE,

D-Link DES-3326SR Layer 3 Switch Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty

D-Link DES-3326SR Layer 3 Switch Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy.

D-Link DES-3326SR Layer 3 Switch Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE,

D-Link DES-3326SR Layer 3 Switch Product Registration Register online your D-Link product at http://support.dlink.com/register/ P

D-Link DES-3326SR Layer 3 Switch D-Link Europe Limited Product Warranty General Terms The Limited Product Warranty set forth below is given by D-LINK

D-Link DES-3326SR Layer 3 Switch Performance of the Limited Product Warranty If a product defect occurs, D-LINK’s sole obligation shall be to repair

D-Link DES-3326SR Layer 3 Switch DES-332GS 1-port GBIC-Based Gigabit Ethernet Switch and stacking Module Figure 1 - 12. Stacking Module with one GBI

D-Link DES-3326SR Layer 3 Switch D-Link Europe Limited Produktgarantie Allgemeine Bedingungen Die hierin beschriebene eingeschränkte Garantie wird d

D-Link DES-3326SR Layer 3 Switch Leistungsumfang der eingeschränkten Garantie Bei Auftreten eines Produktfehlers besteht die einzige Verpflichtung vo

D-Link DES-3326SR Layer 3 Switch D-Link Europe a limité la garantie des produits Conditions Générales La Garantie Produit Limitée énoncée ci-dessous

D-Link DES-3326SR Layer 3 Switch Exécution de la Garantie Produit Limitée En cas de défaut ou d’erreur d’un produit, l’unique obligation de D-LINK se

D-Link DES-3326SR Layer 3 Switch Garantía limitada del producto D-LINK Europa Condiciones generales Esta garantía la ofrece D-LINK (Europe) Ltd. (en

D-Link DES-3326SR Layer 3 Switch Uso de la garantía limitada del producto Si un producto presenta algún defecto, la obligación exclusiva de D-LINK se

D-Link DES-3326SR Layer 3 Switch D-Link Europe Termini di Garanzia dei Prodotti Generalità La presente Garanzia viene fornita da D-LINK (Europe) Lt

D-Link DES-3326SR Layer 3 Switch Prestazioni della Garanzia limitata Qualora comparisse un difetto o una non conformità, D-LINK avrà l’unico obbligo

D-Link DES-3326SR Layer 3 Switch International Offices 228U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA. 92708 TEL: 714-885-6000 Fax 866-743

Registration Card All Countries and Regions Excluding USA Print, type or use block letters. Your name: Mr./Ms _______________________________________

D-Link DES-3326SR Layer 3 Switch Switch Stacking The optional Stacking Module allows up to thirteen DES-3326SR Switches to be interconnected via their

D-Link DES-3326SR Layer 3 Switch Management Options The system may be managed out-of-band through the console port on the front panel or in-band using

D-Link DES-3326SR Layer 3 Switch Chapter 2 Installation Package Contents Before You Connect to the Network Connecting the Console Port Password Protec

D-Link DES-3326SR Layer 3 Switch Before You Connect to the Network Before you connect to the network, you must install the Switch on a flat surface or

D-Link DES-3326SR Layer 3 Switch Password Protection The DES-3326SR does not have a default user name and password. One of the first tasks when settin

D-Link DES-3326SR Layer 3 Switch IP Address Assignment Each Switch must be assigned its own IP Address, which is used for communication with an SNMP n

TABLE OF CONTENTS About This Manual ...

D-Link DES-3326SR Layer 3 Switch Figure 2 - 3. Assigning the Switch an IP Address In the above example, the Switch was assigned an IP address of 10.

D-Link DES-3326SR Layer 3 Switch allowed to view read-only information or receive traps using SNMP v.1 while assigning a higher level of security to a

D-Link DES-3326SR Layer 3 Switch Installing the Switch in a Rack You can install the Switch in most standard 19-inch (48.3-cm) racks. Refer to the ill

D-Link DES-3326SR Layer 3 Switch Connecting Stacked Switch Groups A total of up to thirteen DES-3326SR Switches can be stacked, using the optional sta

D-Link DES-3326SR Layer 3 Switch Notes on Stacking Switches By default, the Switch configuration settings allow it to operate as a standalone device,

D-Link DES-3326SR Layer 3 Switch Configuring a Switch Group for Stacking In order to set up a stack of DES-3326SR Switches it is only necessary to des

D-Link DES-3326SR Layer 3 Switch Figure 2 - 9. config stacking mode enable master The remaining slave units in the stack can be set to the default co

D-Link DES-3326SR Layer 3 Switch To Disable Stacking If you prefer to disable stacking for a standalone Switch, use the CLI command config stacking mo

D-Link DES-3326SR Layer 3 Switch Unit ID Display for Switches in a Switch Stack The Stack ID 7-segment LED (as shown below) on the front panel of the

D-Link DES-3326SR Layer 3 Switch Installing a Redundant Power Supply The DPS-200 is a redundant power-supply unit designed to conform to the voltage r

Admin and User Privileges ...

D-Link DES-3326SR Layer 3 Switch Connect to RPS The DPS-200 is connected to the Master Switch using a 14-pin DC power cable. A standard, three-pronged

D-Link DES-3326SR Layer 3 Switch Chapter 3 Basic Switch Management Before You Start General Deployment Strategy Web-based User Interface Basic Setup

D-Link DES-3326SR Layer 3 Switch General Deployment Strategy 1. Determine how the network would be best segmented. This is probably done using VLANs

D-Link DES-3326SR Layer 3 Switch Web-based User Interface The user interface provides access to various Switch configuration and management screens, a

D-Link DES-3326SR Layer 3 Switch Login to Web Manager To begin managing the Switch simply run the browser you have installed on your computer and poin

D-Link DES-3326SR Layer 3 Switch Basic Setup The subsections below describe how to change some of the basic settings for the Switch such as changing I

D-Link DES-3326SR Layer 3 Switch Switch IP Settings Switch IP settings may initially be set using the console interface prior to connecting to it thro

D-Link DES-3326SR Layer 3 Switch The Switch IP Settings options are: Parameter Description BOOTP The Switch will send out a BOOTP broadcast request

D-Link DES-3326SR Layer 3 Switch User Accounts Management Use the User Accounts table to control user privileges. To view existing User Accounts, open

D-Link DES-3326SR Layer 3 Switch Figure 3- 6. User Accounts - Edit To change the password, type in the New Password and retype it in the Confirm New

SNMP Engine ID ...

D-Link DES-3326SR Layer 3 Switch Figure 3- 7. Save Configuration window The Switch has two levels of memory, normal RAM and non-volatile or NV-RAM. T

D-Link DES-3326SR Layer 3 Switch Restart System The following menu is used to restart the Switch. Access this menu by clicking on the Restart System l

D-Link DES-3326SR Layer 3 Switch Chapter 4 Stacking Mode NOTE: Stacking mode is configured using the CLI command config stacking mode. To view stack

D-Link DES-3326SR Layer 3 Switch These parameters are listed in the CLI display: Parameter Description ID This displays the Switch’s order in the

D-Link DES-3326SR Layer 3 Switch Chapter 5 Port Configuration Configure Ports Serial Port Settings Port Security Settings Traffic Segmentation This

D-Link DES-3326SR Layer 3 Switch Configure Ports Click the Port Configurations link in the Basic Setup folder: For stacked switch installations, it

D-Link DES-3326SR Layer 3 Switch Click on the port you want to configure on the Port Configurations menu and then click the Edit button. This will op

D-Link DES-3326SR Layer 3 Switch Serial Port Settings The Serial Port Settings window allows the configuration of the switch’s serial port. Click on t

D-Link DES-3326SR Layer 3 Switch Port Security Settings Port security settings instruct the Switch on how to handle MAC address table entries for each

D-Link DES-3326SR Layer 3 Switch Traffic Segmentation The traffic segmentation table is used to limit traffic flow from a single port to other ports o

Configure Static Routes ...

D-Link DES-3326SR Layer 3 Switch Chapter 6 Link Aggregation Configure Link Aggregation Link aggregation allows several ports to be grouped together

D-Link DES-3326SR Layer 3 Switch Configure Link Aggregation The Switch supports Link Aggregation Control Protocol and allows for a choice of the Link

D-Link DES-3326SR Layer 3 Switch Configure the Link Aggregation Groups Follow the instructions below to set up Link Aggregation on the Switch. To con

D-Link DES-3326SR Layer 3 Switch To change an existing entry, select the group you want to configure and then click the Edit button: Figure 6- 4. Lin

D-Link DES-3326SR Layer 3 Switch Chapter 7 Port Mirroring The Switch allows you to copy frames transmitted and received on a port and redirect the cop

D-Link DES-3326SR Layer 3 Switch Chapter 8 MAC Forwarding Static Unicast Forwarding Static Multicast Forwarding Broadcast/Multicast Storm Control

D-Link DES-3326SR Layer 3 Switch To add a new MAC address to the MAC Address Forwarding Table, click the New button: Figure 8- 3. Unicast MAC Address

D-Link DES-3326SR Layer 3 Switch Multicast MAC Address Forwarding Multicast MAC addresses can be statically entered into the switch’s MAC Address Forw

D-Link DES-3326SR Layer 3 Switch The following fields can be set: Parameter Description MAC Address:[ ] Allows the entry of the MAC address of a

D-Link DES-3326SR Layer 3 Switch When any one of the ports contained within a given port group receives more broadcast or multicast packets per second

D-Link DES-3326SR Layer 3 Switch About This Manual This manual is organized to provide basic setup information in the beginning chapters, followed by

D-Link DES-3326SR Layer 3 Switch Chapter 9 Spanning Tree Protocol 802.1w Rapid Spanning Tree Configure STP The Switch supports 802.1d Spanning Tree P

D-Link DES-3326SR Layer 3 Switch Edge Port The edge port is a configurable designation used for a port that is directly connected to a segment where a

D-Link DES-3326SR Layer 3 Switch Configure the following STP Switch parameters and click the Apply button to implement them: Parameter Description

D-Link DES-3326SR Layer 3 Switch STP Port Settings In addition to setting Spanning Tree parameters for use on the switch level, the switch allows for

D-Link DES-3326SR Layer 3 Switch The following fields are configured in the STP Port Settings – Edit menu: Parameter Description Cost A Port Cost c

D-Link DES-3326SR Layer 3 Switch Chapter 10 Quality of Service Configuration Configure QoS Output Scheduling Configure 802.1p User Priority Configure

D-Link DES-3326SR Layer 3 Switch Configure QoS Output Scheduling Open the QoS Output Scheduling menu to adjust settings for the four QoS Classes. You

D-Link DES-3326SR Layer 3 Switch Configure 802.1p User Priority Once you have assigned a maximum number of packets and a maximum latency to a given Cl

D-Link DES-3326SR Layer 3 Switch Configure Default Priority The default 802.1p priority to each port can be changed to suit conditions. Click on the 8

D-Link DES-3326SR Layer 3 Switch Configure Bandwidth Control The bandwidth control settings are used to place a ceiling on the transmitting and receiv

D-Link DES-3326SR Layer 3 Switch Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your s

D-Link DES-3326SR Layer 3 Switch Chapter 11 MAC Notification MAC Notification Global Setting MAC Notification Port Settings MAC address notification

D-Link DES-3326SR Layer 3 Switch MAC Notification Port Settings Enable or disable MAC notification for ports with the menu below. Figure 11- 2. MAC N

D-Link DES-3326SR Layer 3 Switch Chapter 12 System Log The menu links to set up a System Log are located in their own subdirectory in the Advanced Set

D-Link DES-3326SR Layer 3 Switch Use the descriptions here as a guide to set up the System Log Server settings. Parameter Description Index Syslog s

D-Link DES-3326SR Layer 3 Switch Chapter 13 SNTP Settings The Simple Network Time Protocol (SNTP), an adaptation of the Network Time Protocol (NPT) is

D-Link DES-3326SR Layer 3 Switch Time Zone and DST See the table below for a description of the Time Zone and DST parameters. Figure 13- 2. Time Zone

D-Link DES-3326SR Layer 3 Switch The following parameters can set: Parameter Description Daylight Saving Time State Use this pull-down menu to Enabl

D-Link DES-3326SR Layer 3 Switch Chapter 14 Security Management Access Profile Configuration CPU Interface Filtering 802.1X Port-based Network Access

D-Link DES-3326SR Layer 3 Switch There are two different menus used to create an access profile mask, one for IP based and another for Ethernet based

D-Link DES-3326SR Layer 3 Switch IP-based Access Profile Mask: Select the IP option from the Access Profile pull-down menu to view the following: F

D-Link DES-3326SR Layer 3 Switch • To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outl

D-Link DES-3326SR Layer 3 Switch Parameter Description Profile ID Type in a unique identifier number for this profile set or al

D-Link DES-3326SR Layer 3 Switch To establish the rule for a previously created Access Profile Mask: Select the Access Profile from the Access Profile

D-Link DES-3326SR Layer 3 Switch Configure the following Access Profile Rule – Ethernet settings: Parameter Description Profile ID This is the ident

D-Link DES-3326SR Layer 3 Switch The following window is used for the IP Rule configuration. Figure 14- 6. Access Profile Rule Configuration – IP Con

D-Link DES-3326SR Layer 3 Switch CPU Interface Filtering There are specific circumstances under which the ACL cannot filter a packet even when there i

D-Link DES-3326SR Layer 3 Switch CPU Interface Filtering Mask Creating an access profile is divided into two basic parts. The first is to specify whi

D-Link DES-3326SR Layer 3 Switch Parameter Description Profile ID Type in a unique identifier number for this profile set or al

D-Link DES-3326SR Layer 3 Switch Parameter Description Profile ID Type in a unique identifier number for this profile set or al

D-Link DES-3326SR Layer 3 Switch To establish the rule for a previously created CPU Interface Filtering entry: Open the CPU Interface Filtering table

D-Link DES-3326SR Layer 3 Switch The following window is used for the IP Rule configuration. Figure 14- 13. CPU Interface Filtering Rule Configuratio