D-Link DAP-1150 User Manual download pdf (Page 19)

19D-Link DAP-1150 User Manual

Section 3 - Conguration

1. To enable wireless security on the AP, use the

drop-down menu to select the desired option.

To enable WEP, select Enable WEP Wireless

Security (basic).

2. Next to Authentication, select either Open

or Shared Key. Shared Key provides greater

security.

3. Select either 64Bit or 128Bit encryption from the

drop-down menu next to WEP Encryption.

4. Next to Default Key Type, select WEP Key 1 and

enter a WEP key that you create. Make sure you

enter this key exactly on all your wireless devices.

You may enter up to four different keys either using

Hex or ASCII. Hex is recommended (letters A-F and

numbers 0-9 are valid). In ASCII all numbers and

letters are valid.

5. Click Save Settings to save your settings. If you

are conguring the AP with a wireless adapter,

you will lose connectivity until you enable WEP

on your adapter and enter the same WEP key as

you did on the AP.

NOTE:

It is recommended to enable encryption on your wireless AP

before your wireless network adapters. Please establish wireless

connectivity before enabling encryption. Your wireless signal

may degrade when enabling encryption due to the added

overhead.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 107 108

No comments

D-Link DAP-1150 User Manual Page 19