D-Link DI 704 - Gateway User Manual

Before you begin… Make sure that any existing Firewall Software/Devices are disabled and/or shutdown before beginning installation of your new D-Link

NOTE: Installing the Print Server software is only necessary if you plan to use the Print Server function of the D-Link DI-704P. If you choose to u

To select the default folder, Click “Next” Note: It is recommended that you click “Next” in the above window. However, if nec

Select “Yes, I want to restart my computer.” Click “OK” After the computer has restarted, the Print Server software installati

Choose the “Details” tab. (In Windows 2000 or NT, choose the “Ports” tab.) At the “Add Port” pull-down menu,

Type in the “IP address” of the DI-704P. Click “OK” In the previous window, make sure the settings are correct. Click “OK” You have completed confi

To manually input the IP Address, please do the following: In the “TCP/IP Properties” window, under the “IP Address” tab, Select “Specify an IP addre

From the desktop, go to Start>Run Type “command” in the box. Click “OK” The following MS-DOS Prompt window will appear. Type “ping 192.168.0.1” a

Building Networks for People Printed in Taiwan

First, plug in the power supply as shown. Plug the other end of the power supply into the power source. Flip the POWER toggle switch to the ON posi

Make sure that TCP/IP protocol has been installed in your computer. Next, set the TCP/IP protocol to “Obtain an IP Address automatica

• Use the “pull-down menu” on this screen to display the Ethernet card that is installed in your computer and connected to the DI-704P. The IP Addre

Type “admin” in the “System Password” field. Click on “Log in” Click on “Setup” -5- Configuring the DI-7

Click “Change” (Please see separate instructions below for DSL and Cable users.) For DSL users: Sel

For DSL users (continued): Enter the PPPoE Account and Password that your ISP assigned to you. Leave the password field blank if you do not

For Cable Users: Select “Dynamic IP Address.” Click “Save.” Enter the “Host Name” given to you by your cable provider (for exa

To check the connection, open the web browser and go to your favorite website. If you are unable to browse, please do the followi