D-Link DSL-2750E User's Guide download pdf (Page 82)

82DSL-2750B User Guide

9. Under Internet Protocol, change the setting to No IP Address. Click Apply.

10. When the Browser Reload message appears, click OK.

11. The following settings take place once the DSL-2750B is in Bridge mode:

a. VPI/VCI: 0/35

b. Encapsulation: LLC

c. DHCP server is disabled for both wired/wireless clients

d. GUI is accessible only through 192.168.1.1 by a PC congured with static IP address of 192.168.1.x/24.

Note: Once you have congured the DSL-2750B for Bridge mode, release and renew your network adapter cards.

On a DHCP line, your PC will now receive a public IP address.

On a PPPoE line, you should receive a 169.254.x.x IP address. The GUI will not be accessible and you should get the

following message when trying to do so.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 94 95

No comments

D-Link DSL-2750E User's Guide Page 82