D-Link DSL 2750U User Manual download pdf (Page 75)

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, proceed to the Net / LAN page.

Figure 67. The page for configuring the local interface.

If needed, edit the basic parameters of the local interface.

Parameter Description

IP Address

The IP address of the router in the local subnet. By default, the

following value is specified: 192.168.1.1.

Netmask

The mask of the local subnet. By default, the following value is

specified: 255.255.255.0.

IGMP snooping

The IGMP snooping function provides management of multicast

traffic in the LAN. Select the needed choice of the radio button:

Blocking: the router does not let multicast traffic pass to the LAN.

Standard: the router lets multicast traffic pass to the LAN devices

which request such traffic. Recommended for better performance of

the LAN.

Off: the router lets multicast traffic pass to all devices from the

LAN. Default value.

When needed settings are configured, click the Save button.

In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP

address in the local area network for a device with a certain MAC address). The router assigns IP

addresses in accordance with the specified pairs only when the DHCP server is enabled (in the

DHCP server section, in the Mode drop-down list, the Enable value is selected).

Page 75 of 138

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 137 138

No comments

D-Link DSL 2750U User Manual Page 75