D-Link DWA-548 User Manual download pdf (Page 43)

43D-Link DWA-548 User Manual

Section 5 - Troubleshooting

• In Infrastructure mode, make sure the same Service Set Identier (SSID) is specied on the settings for the

wireless clients and access points. The SSID factory default setting for D-Link products is default.

• In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it might be necessary

to set up one client to establish a BSS (Basic Service Set) and wait briey before setting up other clients. This

prevents several clients from trying to establish a BSS at the same time, which can result in multiple singular

BSSs being established, rather than a single BSS with multiple clients associated to it.

• Check that the Network Connection for the wireless client is congured properly. Select AP (Infrastructure)

when connecting to an access point and select Ad-Hoc mode when connecting without an access point.

Double-click on the WLAN icon in the taskbar > click on Conguration to change the settings for the wireless

adapter.

•

If Security is enabled, make sure that the correct encryption keys are entered on both the DWA-548 and the access

point. Double-click on the WLAN icon in the taskbar > click Encryption. Check to see that the key selected is set

to the same key as other devices on the network.

• Move the DWA-548 and Access Point or Wireless router into the same room and then test the wireless connection.

• Change the channel of the Access Point.

• Move devices within the line of sight.

7. How can I troubleshoot distance issues using the DWA-548?

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

No comments

D-Link DWA-548 User Manual Page 43