D-Link DIR-320 Installation Guide download pdf (Page 18)

DIR-320 Quick Installation Guide

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data

provided by your Internet service provider (ISP). Make sure that you

have obtained all necessary information prior to configuring your

connection. Otherwise contact your ISP.

WiMAX WAN Connection

1. If your operator specified an identifier for the WiMAX network, proceed

to the WiMAX / Information page, enter the required value in the SSID

field and click the Connect button.

2. Go to the Net / WAN page and click the Add button.

3. In the General settings section, in the Provider drop-down list, leave

the Manually value.

4. From the Connection Type drop-down list, select the needed value.

5. From the Interface drop-down list, select the USB-WIMAX value.

6. Specify a name for your connection (any name for easier identification) in

the Name field.

7. For connection of PPPoE type: in the PPP section, enter authorization

data provided by your ISP (the username (login) in the Username field

and the password in the Password and Password confirmation

fields), or select the Without authorization checkbox if authorization

is not required.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

No comments

D-Link DIR-320 Installation Guide Page 18