D-Link DWL-AB650 Installation Guide download pdf (Page 15)

 Note that if you change the WEP operating mode of the connection

between the AP and your Cardbus Adapter, the WEP keys that you have

entered are saved, but not used. This is indicated by “greying out” the

WEP key entry fields.

 Note if you enter the correct WEP keys, but choose the incorrect WEP

operating mode (that is, clicking the Network Authentication (Shared

Mode) for your Cardbus Adapter when the selected AP is set to Enable

Data encryption − or the opposite) the AirPro utility will show that your

Cardbus Adapter is connected to the AP, but no data transfer will occur.

Please ensure that the correct WEP operating mode is selected.

Setting the IP Address

If the Access Point you are connecting to is configured to use the Dynamic

Host Configuration Protocol (DHCP), your Cardbus Adapter will

automatically be assigned an IP address, subnet mask, default gateway

address, and Domain Name Server (DNS) address.

On some networks, the AP will not be configured to use DHCP. These

networks require you to manually enter the IP settings. Clicking on the IP

Config button at the bottom left-hand will open the IP Config dialog box, as

shown below:

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

D-Link DWL-AB650 Installation Guide Page 15