D-Link GO-DSL-AC750 User Manual download pdf (Page 32)

28D-Link DIR-803 User Manual

Section 3 - Conguration

Select Static IP to manually enter the IP settings supplied by

your ISP.

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

Maximum Transmission Unit - you may need to change the MTU

for optimal performance with your specic ISP. 1500 is the default

MTU.

The default MAC Address is set to the Internet port’s physical

interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address unless

required by your ISP. You can use the Copy Your PC’s MAC

Address button to replace the Internet port’s MAC address with

the MAC address of your Ethernet card.

My Internet Connection:

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Manual Internet Setup

Static (assigned by ISP)

Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,

gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which

are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 138 139

Comments to this Manuals

No comments

D-Link GO-DSL-AC750 User Manual Page 32

Comments to this Manuals

Related products and manuals for Routers D-Link GO-DSL-AC750