38D-Link DCS-5605/DCS-5635 User Manual
Wireless Mode:
Channel:
Authentication:
Encryption:
Key:
Save Settings:
Select Infrastructure (connect to an access point or wireless router) or Ad-Hoc (connect directly to a wireless
client also in ad-hoc mode).
Enter the wireless channel of your wireless network. When connecting to an access point or wireless router, this
will automatically be set.
Select the type of encryption/security. You must know the security settings of your wireless network. If you selected
a network from the drop-down menu, this will be automatically set.
Select Enable or Disable. If you selected a network from the drop-down menu, this will be automatically set.
Enter the security key or passphrase.
Click the Save Settings button to save and activate your settings. Allow up to 2 minutes to connect to your wireless
network.
The image to the right is an example of a wireless setup.
After clicking the Scan button, a list of networks were
displayed in the drop-down menu. The wireless network
called dlink was selected.
As a result, the following fields were automatically
populated:
SSID - dlink
Wireless Mode - Infrastructure
Channel - Auto
Authentication - WPK2-PSK
Encryption - TKIP
To access the network, the user must know the security
passphrase used on the network and enter it in the Key
eld.
The signal strength will be display. The value will be
between 1 and 100, 100 being the best/strongest signal.
Comments to this Manuals