D-Link DCS-931L User Manual download pdf (Page 24)

24D-Link DCS-931L User Manual 24

Section 3 - Conguration

Network Setup

Select this connection if you have a DHCP server running on your network

and would like a dynamic IP address to be updated to your camera

automatically.

You may obtain a static or xed IP address and other network information

from your network administrator for your camera. A static IP address will

ease you for accessing your camera in the future.

IP Address: The xed IP address

Subnet Mask: The default value is “255.255.255.0.” Used to determine if

the destination is the same subnet.

Default Gateway: The gateway used to forward frames to destinations

in a dierent subnet. Invalid gateway settings may cause the failure of

transmissions to a dierent subnet.

Primary DNS: Primary domain name server that translates names to IP

addresses.

Secondary DNS: Secondary domain name server to backup the Primary

DNS.

If you are using a PPPoE connection, enable it and enter the User Name

and Password for your PPPoE account. You can get this information from

your Internet service provider (ISP).

You may congure a Second HTTP port that will allow you to connect to

the camera via a standard web browser. The port can be set to a number

other than the default TCP ports 80. A corresponding port must be opened

on the router. For example, if the port is changed to 1010, users must type

http://192.168.0.100:1010 instead of only “http://192.168.0.100”.

Enable this setting to congure your camera as a UPnP device in the

network.

DHCP:

Static IP Client:

PPPoE Settings:

Port Settings:

UPnP Settings:

This section allows you to congure your network settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

No comments

D-Link DCS-931L User Manual Page 24