D-Link DAP-1533 User Manual download pdf (Page 53)

53D-Link DAP-1533 User Manual

Section 3 - Conguration

Device Name:

LAN Connection

Type:

IPv4 Address:

Subnet Mask:

Default Gateway:

Primary DNS

Server:

Secondary DNS

Server:

My IPv6

Connection:

Enter the Device Name of the AP and click Next to

continue. It is recommended to change the Device

Name if there is more than one D-Link device within

the subnet.

Use the drop-down menu to select Static IP if

your ISP assigned you the IP address, subnet

mask, gateway, and DNS server addresses. Select

Dynamic IP (DHCP) to automatically assign an

IP address to the computers on the LAN/private

network.

Enter the IPv4 address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

Enter the primary DNS server IP address.

Enter the secondary DNS server IP address.

Select the mode you would like the router to use to

connect to the IPv6 Internet from the drop-down

menu.

This section will allow you to change the local network settings of the bridge and to congure the Static settings.

LAN Settings

Static

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 98 99

No comments

D-Link DAP-1533 User Manual Page 53