D-Link DCH-M225 User Manual download pdf (Page 20)

17D-Link DCH-M225 User Manual

Section 3 - Web-based Conguration

Web-based Conguration

Enter your password. By default, Admin is selected as the username

and cannot be changed, and by default, the password is blank.

To access the conguration utility for the DCH-M225 on your PC,

rst connect to the DCH-M225 wirelessly using the Wi-Fi name

(SSID) and password located on your Wi-Fi Conguration Card.

Then open a web browser and enter http://dlinkap.local in the

address bar. You can also use the IP address http://192.168.0.50.

Note: If you have multiple DCH-M225 devices on the network,

you can access web-based conguration via http://dlinkapxxxx.

local. as shown in the included Wi-Fi Conguration Card, with

“xxxx” being the last four digits of the DCH-M225’s MAC address.

The conguration interface will open, and you can congure the

various settings for the DCH-M225. If you have not yet congured

an uplink network, the home screen will show that there is no

connection between the DCH-M225 and the uplink router.

For detailed information on manually setting up your DCH-M225

to extend an existing wireless network, refer to “Using the Manual

Method” on page 21.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

No comments

D-Link DCH-M225 User Manual Page 20