D-Link DGS-3700 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
DAS-3626 VDSL2 Switch User Manual
Section 1
Web-based Switch Configuration
Introduction
Out-of-Band Access to System Management
Interface IP Settings for Switch Management
Login to Web Manager
Web-based User Interface
Web Pages
Introduction
All software functions of the switch can be managed, configured and monitored via the embedded web-based (HTML)
interface. The switch can be managed from remote stations anywhere on the network through a standard browser
such as Microsoft Internet Explorer.
The web-based management module and command line interface (console program or Telnet) are different ways to
access the same internal switching software and configure it. Thus, all settings encountered in web-based
management are the same as those found in the command line interface (CLI).
Out-of-Band Access to System Management
Management access to the System can be done out-of-band with a physical connection directly to the switch. Connect
to the RS-232 Console serial port on the front panel, or use the Mangament Ethernet port located next to the
Console port. Use standard terminal emulation software for Console port access as described in the CLI Command
Reference Manual. Use of the Management port provides the options of using either the web-based management
module or the command line interface via Telnet. The Management port must reside on a different subnet than the in-
band System interface. The default IP settings for the Management port are 192.168.1.10/255.255.255.0 while the
default IP settings for the in-band network interface are 10.90.90.90/255.0.0.0. See below for instructions on how to
change the IP settings for the in-band and out-of-band interfaces used for switch management. For more information
about physical ports and other hardware information please see the Hardware Manual.
Figure 1. Front panel in-band and out-of-band ports
6
Use either Gigabit Ethernet port
(ports 25 and 26) for in-band
access.
Use the Management Ethernet port
(default IP address 192.168.1.10) or
the Console (RS-232) port for out-
of-band access.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 176 177

Comments to this Manuals

No comments