D-Link DAP-1150 User Manual download pdf (Page 88)

88D-Link DAP-1150 User Manual

Section 4 - Security

Congure WEP

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please

establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption

due to the added overhead.

1. Log into the web-based configuration utility by

opening a web browser and entering the device

name of the access point (dlinkap). Click on

Wireless Settings on the left side.

2. Next to Security Mode, select Enable WEP

Security.

3. Next to Authentication, select Shared Key or

Open.

4. Next to WEP Encryption, select 64-bit or 128-bit

encryption.

5. Next to Key Type, select either Hex or ASCII.Hex

(recommended) - Letters A-F and numbers 0-9 are

valid. ASCII - All numbers and letters are valid.

6. Next to Key 1, enter a WEP key that you create.

Make sure you enter this key exactly on all your

wireless devices. You may enter up to 4 different

keys.

7. Click Save Settings to save your settings. If you are conguring the access point with a wireless adapter, you will lose

connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 107 108

No comments

D-Link DAP-1150 User Manual Page 88