D-Link DI-604 User Manual download pdf (Page 19)

-19-

Maximum Idle Time: The amount of time of inactivity before

disconnecting your PPPoE session. Enter a Maximum Idle Time (in

minutes) to define a maximum period of time for which the Internet

connection is maintained during inactivity. If the connection is inactive for

longer than the defined Maximum Idle Time, then the connection will be

dropped. Either set this to zero or enable Auto-reconnect to disable this

feature.

MTU:

MTU stands for Maximum Transmission Unit. For PPPoE

connections, you may need to change the MTU settings in order to work

correctly with your ISP.

Auto-Reconnect: If enabled, the Broadband Router will automatically

connect to your ISP after your system is restarted or if the connection is

dropped.

HOME > LAN

LAN is short for Local Area Network. This is considered your internal

network. These are the IP settings of the LAN interface for the DI-604.

These settings may be referred to as Private settings. You may change

the LAN IP address if needed. The LAN IP address is private to your

internal network and cannot be seen on the Internet.

IP Address: The IP address of the LAN interface. The default IP address

is 192.168.0.1.

Subnet Mask:

The subnet mask of the LAN interface. The default subnet

mask is 255.255.255.0.

Local Domain Name: This field is optional. Enter in the your local domain

name.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 80 81

No comments

D-Link DI-604 User Manual Page 19