DI-704P Ethernet Broadband Router User’s Manual (Please refer to the Quick Install Guide for installation instructions.)
-20- 5. PPTP Just follow steps below to configure the PPTP WAN type: • Set My IP Address as the IP address that the ISP assigned to your PC, e.g. 1
-21- DHCP Server The DI-704P includes a DHCP Server. If you select “Enable” the DHCP Server, and you configure the computers on your network to “Obt
-22- Virtual Server The firewall filters out unrecognized packets to protect your Intranet; so all computers networked with the DI-704P are invisibl
-29- Appendix B TCP/IP Configuration for Windows 95/98 This section shows you how to install TCP/IP protocol into your personal computer after you h
-30- 5. Select Microsoft in the Manufacturers list. And choose TCP/IP in the Network Protocols list. Click OK to return to the Network window.
-2- Table of Contents Introduction...4 Functions and
-3- B.1 Install TCP/IP Protocol into Your PC...29 B.2 Set TCP/IP Protocol for Working with the DI-704P ...
-14- Configuring the Ethernet Broadband Router The DI-704P provides Web based configuration. You can configure your DI-704P through your Netscape C
-15- is ”admin”) in the System Password field and click on the Log in button. If the password is correct, the web appearance will be changed into admi
-16- Device Information This option allows you to observe the DI-704P’s working status: A. Modem Status B. Printer Status. The possible kinds of p
-17- Useful Tools This function enables you to change the administrator password, and get information about the Firmware version and the WAN's M
-18- Setup Before you begin the Setup, you must choose the correct WAN type. 1. LAN IP Address: the DI-704P’s IP address. The default address is 19
-19- Below are the five WAN types and the fields required to implement them: 1. Static IP Address Enter the proper setting provided by your ISP fo
Comments to this Manuals