-20-
5. PPTP
Just follow steps below to configure the PPTP WAN type:
• Set My IP Address as the IP address that the ISP assigned to your PC,
e.g. 10.0.0.140.
• Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g.
255.255.255.0.
• Set Server IP Address as the IP address of the DSL modem, e.g.
10.0.0.138.
• Input the PPTP Account and Password.
• Input the Connection ID if your ISP requires it.
• Save the setting and restart the router.
• In the Command prompt, type PING 4.0.0.1. If the reply is positive,
the router and your PC have been successfully configured for PPTP
WAN type.
Comments to this Manuals