D-Link DI-704P User Manual download pdf (Page 9)

-19-

Below are the five WAN types and the fields required to implement them:

1. Static IP Address

Enter the proper setting provided by your ISP for the following fields:

WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS

2. Dynamic IP Address

• Host Name: optional. Required by some ISPs, for example, @Home.

• Renew IP Forever: this feature enables the DI-704P to renew the IP

address automatically when the lease time is expired even if the system

is in an idle state.

3. PPP over Ethernet

• PPPoE Account and Password: the account and password your ISP

assigned to you. If you don't want to change the password, leave the

password field blank.

• PPPoE Service Name: (optional) Input the service name if your ISP

requires it.

• Maximum Idle Time: set the length of “no activity” time at which to

disconnect your PPPoE session. Setting it to “0” will disable this

feature.

4. Dial-up Network

• Dial-up Telephone, Account and Password: assigned by your ISP. If you

don't want to change the password, keep it empty.

• Primary and Secondary DNS: automatically assigned if they are

configured as "0.0.0.0."

• Maximum Idle Time: the length of “no activity” time at which to

disconnect your dial-up session.

• Baud Rate: the communication speed between the DI-704P and your

MODEM or ISDN TA.

• Extra Setting: needed to optimize the communication quality between

the ISP and your MODEM or ISDN TA

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

D-Link DI-704P User Manual Page 9