D-Link DIR-100 User Manual download pdf (Page 19)

DIR-100 Ethernet Broadband Router

Setup Wizard – Configure Russia PPPoE Connection

For PPPoE connections, select the Address Mode Dynamic IP or Static IP, type in the Username and

Password used to identify and verify your account to the ISP. Retype the password again and if necessary,

type a Service Name or domain name. For Static IP address mode, type the IP Address assigned to your

account. Your ISP should provide this IP address along with other account information. An additional set of

IP settings might be required to create a static route to the ISP. Enter the WAN IP settings used to create this

route (as given by the ISP) and click Next to continue.

PPPoE Setting Description

User Name

The PPPoE user name used to establish the identity of your ISP

account. Typically this is in the form [email protected] - some

users may be allowed to select a personalized user name for their

account.

Password

Enter the password used to verify the identity of your account. Your

ISP may have provided this to you or you might have chosen a

personalized password that is easy to remember. The password is

case-sensitive, so type the characters exactly as given to you.

Retype Password

Retype the password exactly as entered in the previous field.

Service Name

Enter the Service Name provided by your ISP if necessary

(optional).

WAN Physical Settings

Some PPPoE connections use a static route to the ISP. This

requires that an additional set of IP settings be defined for the WAN

port. Configure these settings as instructed by the ISP.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

No comments

D-Link DIR-100 User Manual Page 19