D-Link DIR-100 User Manual download pdf (Page 27)

DIR-100 Ethernet Broadband Router

Settings for Dynamic IP Address connections:

Dynamic IP Description

IP Address Enter the IP address based on the information provided to you by your

ISP.

Subnet Mask Enter the Subnet Mask based on the information provided to you by

your ISP.

ISP Gateway

Address

Enter the Default Gateway based on the information provided to you

by your ISP.

MAC Address This field will instruct the user to enter the Media Access Control

(MAC) address of the Ethernet Card of your computer, if instructed to

do so by your ISP. To quickly accomplish this, click the Duplicate

MAC address from the customer end button, which will

automatically copy the MAC address of your Ethernet card and enter it

into the space provided, which will replace the MAC address of the

router.

Primary DNS

Address

This entry is for the IP address of your primary domain name server,

which should also be provided to you by your ISP. The router will first

try the Primary DNS Address to resolve a website’s URL IP address.

If this IP address fails, the router will then try the Secondary DNS

Address.

Secondary DNS

Address

The IP address of the secondary domain name server will be used to

resolve a website’s URL IP address if the Primary DNS Address fails.

The information in this field should also be provided by your ISP.

MTU This field refers to the Maximum Transfer Unit, which is the maximum

size of a packet, in bytes, that will be accepted by the router. The

default setting is 1500 bytes. This field should not be altered unless

instructed by your ISP.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

No comments

D-Link DIR-100 User Manual Page 27