D-Link DIR-320NRU User Manual download pdf (Page 154)

DIR-320NRU Multifunction Wireless Router Supporting

WiMAX, 3G GSM/CDMA with Built-in Switch

User Manual

Operation Guidelines

Connecting to Cable or DSL Modem

If you need to connect the router to a cable or DSL modem, do the following.

1. Place the router in an open location in the supposed center of your wireless network. Do not

plug the power adapter into the router.

2. Turn off your PC.

3. Unplug the Ethernet cable (that connects your PC to your modem) from your computer and

place it into the INTERNET port of your router.

4. Plug another Ethernet cable into one of the four LAN ports on the router. Plug the other end

into the Ethernet port of your PC.

5. Turn on your modem. Wait until the modem is booted (about 30 seconds).

6. Plug the power adapter to the router and connect to an electrical outlet or power strip. Wait

until the router is booted (about 30 seconds).

7. Turn on your PC.

8. Verify the LEDs of the router. The following LEDs should be on: Power, LAN (of the

relevant Ethernet port), and Internet. If not, make sure that your computer, modem, and

router are powered on and the relevant cables are connected correctly.

Page 154 of 156

1 2 ... 149 150 151 152 153 154 155 156

No comments

D-Link DIR-320NRU User Manual Page 154