D-link DIR-655 User Manual download pdf (Page 27)

27D-Link DIR-655 User Manual

Section 3 - Conﬁguration

Check the box to enable the wireless function. If you do not

want to use wireless, uncheck the box to disable all the wireless

functions.

Service Set Identiﬁer (SSID) is the name of your wireless network.

Create a name using up to 32 characters. The SSID is case-

sensitive.

The Auto Channel Scan setting can be selected to allow

the DIR-655 to choose the channel with the least amount of

interference.

Indicates the channel setting for the DIR-655. By default the

channel is set to 6. The Channel can be changed to ﬁt the channel

setting for an existing wireless network or to customize the

wireless network. If you enable Auto Channel Scan, this option

will be greyed out.

Select one of the following:

802.11g Only - Select if all of your wireless clients are 802.11g.

Mixed 802.11g and 802.11b - Select if you are using both 802.11b and 802.11g wireless clients.

802.11b Only - Select if all of your wireless clients are 802.11b.

802.11n Only - Select only if all of your wireless clients are 802.11n.

Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Select the Channel Width:

Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients.

Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.

Enable Wireless:

Enable Auto

Channel Scan:

Wireless Settings

Wireless Network

Name:

Wireless Channel:

802.11 Mode:

Channel Width:

Transmission Rate:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

No comments

D-link DIR-655 User Manual Page 27